Kia Carens. Instruction — part 129
2001 > 1.8L DOHC >
Overhaul
1. Disassemble in the order shown in the figure.
2. Inspect all parts and repair or repalce as necessary.
3. Assemble in the reverse order of disassembly, refer to Assembly note.
Assembly note
Extension bar
1. Install the extension bar to the floor, and ten onto the transaxle. Tighten the extension bar nut at the
transaxle,
Tightening torque : 23~34 lb-ft (31~46 N·m, 3.2~4.7kg-cm)
2. Tighten the shifter bracket nuts to the specified torque.
Tightening torque : 86.9~130.2 lb-in (9.8~14.7N·m, 100~150 kg-cm)
Spring
Make sure that the hooked part of the spring is properly seated in the bracket groove, as shown in the figure.
Automatic Transaxle System
General Information
Automatic Transaxle System
2001 > 1.8L DOHC >
Special service tools
Automatic transaxle
Tool (Name and Number)
Illustration
Use
0K2CA 089 HSP
Hi-Scan pro
0K130 283 021
Puller, ball joint
Used to remove tie-rod end.
0K130 990 007
Stand, engine
Used to disassemble transaxle.
0K670 990 AA0
Puller set, bearing
Used to remove bearing
0K201 190 AA0
Gauge set, oil pressure
Used to measure line pressure.
0K201 270 014
Holder, diff. side gear
Used to hold differential side gear.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст