Kia Carens. Instruction — part 116
8. Remove SST(0K210 323 AA0). Replace and tightne high-pressure hose. Tighten to specified torque.
Tightening torque : 29~36 lb-ft(39~49 Nm, 4~5kg-m)
9. Bleed air from system (Refer to steering system on-vehicle service).
Drive belt
1. Check drive belt for wear, cracks, and fraying. Replace if necessary.
2. Measure drive belt tension with a tension gauge.
Tension (lb (N, kg))
Drive belt
New
Used
A/C and P/S
110~132
(491~589, 50~60)
95~110
(422~491, 43.2~50.0)
3. Measure deflection by applying moderate pressure (22lb [98N]) midway between pulleys. Adjust if necessary.
Deflection (in (mm))
Drive belt
New
Used
A/C and P/S
110~132
(491~589, 50~60)
95~110
(422~491, 43.2~50.0)
Adjustment
Drive belt
1. Loosen pivot bolt, locknut, and bracket nut. Turn adjusting bolt to set specified deflection.
2. Tighten, and to specified torques.
Tightening torque
Bolt : 28~38 lb-ft(37~52 Nm, 3.8~5.3 kg-m)
Nut : 28~38 lb-ft (37~52 Nm, 3.8~5.3kg-m)
Nut : 28~38 lb0ft (37~52 Nm, 3.8~5.3kg-m)
Replacement
1. Loosen pivot bolt, bracket nut, and locknut.
2. Turn adjusting bolt to release belt tension.
3. Remove belt.
4. Install a new drive belt and adjust deflection.
Manual Transaxle System
General Information
Manual Transaxle System
2001 > 1.8L DOHC >
Structural view
Component
Cross-sectional view
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст