Kia Carnival (2009+). Instruction — part 133
5. Connect the battery cable from battery's negative post to the starter motor body.
6. Adjust until battery voltage shown on the voltmeter reads 11volts.
7. Confirm that the maximum amperage is within the specifications and that the starter motor turns smoothly and
freely.
Current : 85A MAX
Speed : 2,600 rpm
Engine Electrical System
Starting System - Starter
Engine ,SLJ[YPcal System
2009 > G 3.8 DOHC >
COMPONENT
2009 > G 3.8 DOHC >
REMOVAL
STARTER
1. Disconnect the battery negative cable.
2. Disconnect the starter cable (A) from the B terminal (B) on the solenoid (C), then disconnect the connector (D)
from the S terminal (E).
3. Remove the 2 bolts holding the starter, then remove the starter.
4. Installation is the reverse of removal.
5. Connect the battery negative cable to the battery.
DISASSEMBLY
1. Disconnect the M-terminal on the magnet switch assembly.
2. After loosening the 3 screws (A), detach the magnet switch assembly (B).
3. Loosen the through bolts (A).
4. Remove the brush holder assembly (A), yoke (b) and armature (C).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст