Kia Carnival (2009+). Instruction — part 418

Body (Interior and Exterior)

Interior ->PUKZOPLSK.SHZZ

Body (Interior and Exterior)

2009 > G 2.7 DOHC >

COMPONENTS

2009 > G 2.7 DOHC >

REPLACEMENT

REMOVAL

- Put on gloves to protect your hands.
- Use seat covers to avoid damaging any surfaces.

1. Remove the following items.

A. Front pillar trim, both sides.
B. Windshield wiper arms and cowl cover (See page BE-“Windshield wiper”).

2. Remove the windshield glass side molding.

3. Cut out the sealant using the sealant cutting tool (A)(09861-31100).

4. Remove the windshield (A) carefully using the glass holder (B)(09861-31100).

INSTALLATION

1. With a knife, scrape the old adhesive smooth to a thickness of about 2mm (0.08 in.) on the bonding surface around

the entire windshield opening flange:

A. Do not scrape down to the painted surface of the body; damaged paint will interfere with proper bonding.
B. Remove the rubber dam and fastreners from the body.
C. Mask off surrounding surfaces before painting.

2. Clean the bonding surface with a sponge dampened in alcohol. After cleaning, keep oil, grease and water from

getting on the clean surface.

3. Install the windshield (A) upper molding (B) and fasteners (C). Do not allow any gaps.