Kia Carnival (2009+). Instruction — part 483

2009 > G 2.7 DOHC >

INSPECTION

1. Check the power sliding door control module input/output value by using the diagnostic tool.

2. When checking the latch, select a vehicle type and "POWER SLIDING/TAIL GATE" menu.

3. Select the "POWER SLIDING DOOR".

4. Select the sensor output. And then check the unlatch feedback (Unlocked state) voltage while operating power

sliding door in power mode.

※ Above voltage and numerical value may be different from the real value.

5. If there is no change in voltage, change the latch.

ANTI PINCH STRIP

1. Check the power sliding door control module input/output value by using the diagnostic tool. If the operation of door

control module is abnormal, replace anti pinch strip control module.

2. When checking the anti pinch strip operation, select a vehicle type and "POWER SLIDING/TAIL GATE" menu.

3. Select power sliding door.

4. Select the sensor output. And then check the anti pinch strip sensor output while operating power sliding door in

power mode.

※ Above voltage and numerical value may be different from the real value.

5. Change the anti pinch strip sensor, if there is no change from OFF to ON during operation.

Body Electrical System

Power Sliding Door System - Power Sliding

Door Switch

Body Electrical System

2009 > G 2.7 DOHC >

INSPECTION

OVERHEAD CONSOLE DOOR SWITCH INSPECTION

1. Check the overhead console door switch input/output value by using the diagnostic tool. If the operation of

overhead console door switch is abnormal, check the IPM and replace.

2. When checking the overhead console switch operation, select a vehicle type and "IPM" menu.

3. Select a in panel module (IPM) and "CURRENT DATA".

4. Check the PSD PTG power control switch and PSD left/right switch.

5. Confirm that output is changed by the controlling ON/OFF of each switch on the overhead console.

DOOR HANDLE SWITCH INSPECTION

1. Check the power sliding door control module input/output value by using the diagnostic tool. If the operation of door

control module is abnormal, replace power sliding door control module.

2. When checking handle switch operation, select a vehicle type and "POWER SLIDING/TAIL GATE" menu.