Kia Carnival (2009+). Instruction — part 85
2. Install the front lower arm (A) ball joint mounting bolt (B) to the knuckle.
Tightening torque Nm (kgf.m, lb-ft) :
90 ~ 120 (9 ~ 12, 65.1 ~ 86.8)
3. Install the wheel and the tire(A) to the front hub(B).
Tightening torque Nm (kgf.m, lb-ft) :
90 ~ 110 (9 ~ 11, 65.1 ~ 79.5)
Be careful not to damage the hub bolts(C) when installing the front wheel and tire(A).
INSPECTION
1. Check the bushing for wear and deterioration.
2. Check the lower arm for bending or breakage.
3. Check the ball joint dust cover for cracks.
4. Check all bolts.
5. Check the lower arm ball joint for rotating torque.
(1) If a crack is noted in the dust cover, replace the ball joint assembly.
(2) Move the ball joint stud several times in a circular motion.
(3) Measure the ball joint rotating torque.
Standard value :
1 ~ 3.5 Nm (10 ~ 35 kgf.cm, 0.72 ~ 2.53 lb-ft)
Measure torque using the special tool(09532-11600) and torque wrench at the range of 0.5 - 2 rpm after
moving the ball joint stud 10 times at room temperature.
(4) If the rotating torque is below the lower limit of standard value, replace the ball joint assembly.
(5) Even if the rotating torque is below the lower limit of the standard value, the ball joint may be reused unless it
has drag and excessive play.
Suspension System
Front Suspension System - Front Stabilizer
Bar
Suspension System
2009 > G 3.8 DOHC >
COMPONENTS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст