Kia Carnival (2009+). Instruction — part 197

Engine Mechanical System

Engine And Transaxle Assembly

Engine Mechanical System

2009 > G 2.7 DOHC >

REMOVAL

• Use fender covers to avoid damaging painted surfaces.
• To avoid damage, unplug the wiring connectors carefully while holding the connector portion.

• Mark all wiring and hoses to avoid misconnection.

1. Remove the engine cover.

2. Disconnect the neagative terminal from the battery and remove the battery(A).

3. Remove the intake air hose and air cleaner assembly.

(1) Disconnect the MAF connector(A).

(2) Disconnect the breather hose(B) from air cleaner hose.

(3) Remove the intake air hose and air cleaner assembly(C).

4. Remove the battery tray(A).

5. Remove the under cover.

6. Drain the engine coolant.

7. Remove the upper radiator hose(A) and lower radiator hose(B).

8. Remove the transaxle oil cooler hoses(A/T vehicles only).

9. Remove the fuel inlet hose(A) from the delivery pipe.

10. Disconnect the engine wiring harness connectors.

(1) Disconnect the No.1/No.2 knock sensor connectors(A,B), the oil pressure switch connector(C), the ignition coil

harness(D) and the No.1 VIS(Variable Induction System) connector(E).

(2) Disconnect the bank 1 front/rear O2 sensor connectors(A).

(3) Disconnect the injection connectors(A,B,C), the ground lines(D), the condenser connector(E) and the Ignition

coil connectors(F).

(4) Disconnect the injection harness connector(A), the No.2 VIS(Variable Induction System) connector(B), the

No.1/No.2 OCV(Oil Control Valve) connectors(C,D) and the OTS(Oil Temperature Sensor) connector(E).