Kia Carnival (2009+). Instruction — part 566
Heating, Ventilation, Air Condi-
tioning
Blower - Intake Actuator
Heating, Ventilation, Air Conditioning
2009 > G 2.7 DOHC >
COMPONENT LOCATION
2009 > G 2.7 DOHC >
DESCRIPTION
1. The intake actuator is located at the blower unit.
2. It regulates the intake door by signal from control unit.
3. Pressing the intake selection switch will shift between recirculation and fresh air modes.
2009 > G 2.7 DOHC >
INSPECTION
1. Ignition "OFF"
2. Disconnect the intake actuator connector.
3. Verify that the actuator operates to the recirculation position when connecting 12V to the terminal 3 and grounding
terminal 4.
4. Verify that the intake actuator operates to the fresh position when connecting in the reverse.
5. If the intake actuator is not operated well, substitute with a known-good intake actuator and check for proper
operation.
6. If the problem is corrected, replace the intake actuator.
REPLACEMENT
1. Disconnect the negative (-) battery terminal.
2. Remove the glove box (Refer to BD group).
3. Disconnect the intake actuator connector.
4. Loosen the mounting screw and then remove the intake actuator (A) from the blower unit.
5. Installation is the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст