Kia Carnival (2009+). Instruction — part 143
Emission Control System
Evaporative Emission Control System -
Purge Control Solenoid (PCS) Valve
Emission Control System
2009 > G 3.8 DOHC >
INSPECTION
When disconnecting the vacuum hose, make an identification mark on it so that it can be reconnected to its
original position.
1. Disconnect the vacuum hose from the solenoid valve.
2. Detach the harness connector.
3. Connect a vacuum pump to the nipple which is connected to intake manifold.
4. Apply vacuum and check when voltage is applied to the PCSV and when the voltage is discontinued.
Battery voltage
Normal condition
When applied
Vacuum is released
When discontinued
Vacuum is maintained
5. Measure the resistance between the terminals of the solenoid valve.
PCSV coil resistance(!) :
19.0 ~ 22.0! at 20°C (68°F)
DESCRIPTION
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister
and the intake manifold. It is a solenoid valve and is open when the PCM grounds the valve control line. When the
passage is open (PCSV ON), fuel vapors stored in the canister is transferred to the intake manifold.
SPECIFICATION
Item
Specification
Coil Resistance (!)
19.0 ~ 22.0! at 20°C (68°F)
SCHEMATIC DIAGRAM
Emission Control System
Crankcase Emission Control System - Fuel
Filler Cap
Emission Control System
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст