Kia Carnival (2009+). Instruction — part 152

8. Connect the return tube with a clamp. (see ST group)

9. Connect the lower arm, the tie rod end ball joint, the stabilizer bar link to the front knuckle. (see SS group)

10. Connect the power steering pressure tube (A) to the power steering oil pump.

11. Install the under cover (A).

12. Install the steering column joint bolt. (see ST group).

13. Install the front wheels and tires.

14. Tighten the transaxle insulator mounting bolt (A).

TORQUE:
90~110 Nm(900~1100 kgf.cm, 65.1~79.5 lb-ft)

15. Tighten the transaxle mounting bolts (A).

TORQUE:
65~85 Nm(650~850 kgf.cm, 47.0~61.5 lb-ft)

[2.9 DSL]

[3.8 GSL]

16. Remove the SST (09200-38001) holding the engine and transaxle assembly.

[2.9 DSL]

[3.8 GSL]

17. Connect the transaxle oil cooler hoses (A) to the tubes (C) by fastening the clamps (B).

18. Install the shift cable by tightening the bolt (A) and clip (B).

TORQUE:
10~14 Nm(100~140 kgf.cm, 7.2~10.1 lb-ft)

19. Connect the transaxle wire harness connectors.

(1) Install the inhibiter switch connector (A).

(2) Install the solenoid valve connector (A).

[2.9 DSL]

[3.8 GSL]