Kia Carnival (2009+). Instruction — part 271

12. Remove the clip (A) and bracket mounting bolt and disconnect the parking brake cable (B) from the carrier

assembly.

13. Remove the rear brake assembly (A).

Tightening torque Nm (kgf.m, lb-ft):
50 ~ 60 (5.0 ~ 6.0, 36 ~ 43)

14. Remove the rear shock absorber (A).

15. After loosening the castle nut and split pin, disconnect the assist arm (A) from the carrier assembly using a SST

(09568-4A000).

Tightening torque Nm (kgf.m, lb-ft):
90 ~ 100 (9.0 ~ 10.0, 65 ~72)

16. After loosening the castle nut and split pin, disconnect the upper arm (A) from the carrier assembly using a SST

(09562-4A000).

Tightening torque Nm (kgf.m, lb-ft):
90 ~ 100 (9.0 ~ 10.0, 65 ~ 72)

17. Remove the carrier assembly (A) from the trailing arm by loosening the bolts.

Tightening torque Nm (kgf.m, lb-ft):
80 ~ 110 (8.0 ~ 11.0, 58 ~ 80)

INSTALLATION

1. Installation is the reverse of removal.

• The rear hub lock nut should be replaced with new ones.
• After installation lock nut, stake the lock nut using a chisel and hammer as shown in the illustration below.

2. Check the rear hub & bearing assembly starting torque using a spring balance.

20 kgf.cm

INSPECTION

1. Check the hub for cracks and wear.

2. Check the brake disc for scoring and damage.

3. Check the carrier for cracks.

Clutch System

General Information

Clutch System