Kia Carnival (2009+). Instruction — part 314
25. Install the air cleaner assembly (B) by tightening the two mounting bolts (A).
26. Reassemble the air cleaner filter, install the air cleaner upper body (B) and connect the air flow sensor connector
(A).
27. Install the battery (A).
28. Refill the transaxle fluid. (see 'Service adjustment procedure')
29. Refill the power steering fluid. (see 'ST' group)
30. Install the engine cover. (see 'EM' group)
When replacing the automatic transaxle, reset the automatic transaxle's values by using the High- Scan Pro.
1) Connect the Hi-Scan Pro connector to the data link connector under the crash pad and power cable to the cigar
jack under the center facia.
2) Turn the ignition switch on and power on the Hi-Scan Pro.
3) Select the vehicle's name.
4) Select 'AUTOMATIC TRANSAXLE'.
5) Select 'RESETTING AUTO T/A VALUES' and perform the procedure.
6) Perform the procedure by pressing F1 (REST).
Automatic Transaxle System
Valve Body System - Solenoid Valve
Automatic Transaxle System
2009 > G 2.7 DOHC >
DESCRIPTION
Actuators
Solenoid Valve for Pressure Control
- Sensor type: Normal open 3-way
- Operating temperature : -30°C~130°C(-22°F~266°F)
- Frequency:
LR, 2ND, UD, OD: 61.27Hz (at the ATF temp. above -20°C(-4°F))
DCC: 30.64Hz
- Internal resistance:
3.0 ± 0.5 ! (LR, 2ND, UD, OD, TCC)
4.35 ± 0.5 ! (VFS)
- Surge voltage: 56 V (Except VFS)
(LR, 2ND, UD, OD, DCC)
Location
Solenoid Valves Schedule
Position
Solenoid valves
Operation
LR
2ND
UD
OD
* DCC
1st gear
OFF
ON
OFF
ON
OFF
2nd gear
ON
OFF
OFF
ON
OFF
3rd gear
ON
ON
OFF
OFF
ON
4th gear
ON
OFF
ON
OFF
ON
Reverse
OFF
ON
ON
ON
OFF
N, P (STD. mode)
OFF
ON
ON
ON
OFF
N, P (Hold mode)
ON
OFF
ON
ON
OFF
*: Reference value.
(DCC solenoid valve will be ON when the operating condition is satisfied)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст