Kia Carnival (2009+). Instruction — part 231
2009 > G 2.7 DOHC >
INSPECTION
1. Disconnect the ventilation hose from the positive crankcase ventilation (PCV) valve. Remove the PCV valve from
the rocker cover and reconnect it to the ventilation hose.
2. Run the engine at idle and put a finger on the open end of the PCV valve and make sure that intake manifold
vacuum can be felt.
The plunger inside the PCV valve will move back and forth.
Emission Control System
Crankcase Emission Control System -
Positive Crankcase Ventilation (PCV) Valve
Emission Control System
2009 > G 2.7 DOHC >
OPERATION
Engine condition
Not running
Engine condition
Idling or decelerating
PCV valve
Not operating
PCV valve
Fully operating
Vacuum passage
Restricted
Vacuum passage
Small
Engine condition
Normal operation
Engine condition
Accelerating and high load
PCV valve
Properly operating
PCV valve
Slightly operating
Vacuum passage
Large
Vacuum passage
Very large
2009 > G 2.7 DOHC >
REMOVAL
1. Disconnect the vacuum hose (A).
2. Remove the PCV Valve (B).
INSTALLATION
Install the PCV valve and tighten to the specified torque.
PCV Valve installation : 7.8 ~ 11.8 N!m (0.8 ~ 1.2 kgf!m, 5.8 ~ 8.7lbf!ft)
INSPECTION
1. Remove the PCV valve.
2. Insert a thin stick(A) into the PCV valve(B) from the threaded side to check that the plunger moves.
3. If the plunger does not move, the PCV valve is clogged. Clean it or replace.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст