Kia Carnival (2009+). Instruction — part 426

3. Lift the back side of the seat.

4. Arrange the seat to the rear side of the strike by using the roller.

5. Turn the seat to the forward at an angle of about 81 degrees for locking between the plate and striker.

6. Turn the seat to the rearward for locking between the rear latch and striker.

7. Uufold the back of the seat.

8. The leg cover hole color must be discolored to green.

RECLINER COVER REPLACEMENT

1. Remove the recliner lever(B) and cover (A).

2. Loosen the mounting bolts, then remove the seat back assembly (A).

3. Disconnect the auto tumble cable(B).

SEAT BACK COVER REPLACEMENT

1. Remove the recliner cover.

2. Remove the cover (A).

3. After the armrest mounting bolt, then remove the armrest (B).

4. Remove the seat back panel (A).

5. Remove the hog-ring clips (A).

6. Remove the headrest and headrest guide.

7. After removing the hog-ring clips (A) on the front of seat back remove the seat back cover (B).

8. Installation is the reverse of removal.

- To prevent wrinkles, make sure the material is stretched evenly over the cover (B) before securing the

hogring clips (A)

- Replace the hogring clips with new ones using special tool (C).