Kia Carnival (2009+). Instruction — part 462
5. Installation is the reverse of removal.
INSPECTION
SLIDE MOTOR LIMIT SWITCH
1. Disconnect the limit switch and operate the limit switch.
2. Check for continuity between the terminals.
3. Make sure that the seat operation is normal in the reverse after the maximum operation.
4. If operation is not correct, replace the limit switch.
POWER SEAT MOTOR
1. Disconnect the connectors for each motor.
2. With the battery connected directly to the motor terminals, check if the motors run smoothly.
3. Reverse the connections and check that the motor turns in reverse.
4. If operation is not correct, replace the motors.
Body Electrical System
Seat Electrical - Power Seat Control Switch
Body Electrical System
2009 > G 2.7 DOHC >
REPLACEMENT
1. Disconnect the nagative(-) battery terminal.
2. Remove the door trim panel (Refer to Body group - front door).
3. Remove the switch connector (16pin) from the wiring harness, And then loosen the mounting screws (3EA).
4. Remove the switch from the front door panel.
5. Installation is the reverse of removal.
Body Electrical System
:LH[,SLJ[YPJHS:LH[/LH[LY:^P[JO
Body Electrical System
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст