Kia Carnival (2009+). Instruction — part 446

3. Check for continuity between the terminals in each position according to the table.

BURGLAR HORN

1. Remove the burglar horn after removing 2 bolts and disconnect the 2P connector from the burglar horn.

2. Test the burglar horn by connecting battery power to the terminal 1 and ground the terminal 2.

3. The burglar horn should make a sound. If the burglar horn fails to make a sound replace it.

2009 > G 2.7 DOHC >

SPECIFICATION

Items

Specifications

Keyless entry transmitter
Power source

Lithium 3V battery (1EA)

Transmissible distance

30m or more

Life of battery

2 years or more (at 10 times per day)

Button

Door lock/unlock
PSD(Power Sliding Door) open/close (option)
PTG(Power Tail Gate) open/close (option)
Panic
Tailgate open (option)

Transmission frequency

447 MHz (EUROPE, AUSTRAILIA, MIDDLE EAST)
315.00 MHZ (GENERAL)

Body Electrical System

2L`SLZZ,U[Y`(UK)\YNSHY(SHYT;YHUZTP[[LY

Body Electrical System

2009 > G 2.7 DOHC >

INSPECTION

1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter.

2. Remove the battery and check voltage if the red light doesn't flicker.

Standard voltage : 3V

3. Replace the transmitter battery with a new one, if voltage is below 3V then try to lock and unlock the doors with the

transmitter by pressing the lock or unlock button five or six times.

4. If the doors lock and unlock, the transmitter is O.K, but if the doors don't lock and unlock, register the transmitter

code, then try to lock and unlock the doors.

5. If the transmitter is failure, replace only the transmitter.