Kia Carnival (2009+). Instruction — part 287

2009 > G 2.7 DOHC >

REMOVAL

1. Disconnect the pressure tube (A) from the oil pump by loosening the eye bolt.

Tightening torque Nm (kgf-m, lb-ft):
65 ~ 75 (6.5 ~ 7.5, 47 ~ 54)

2. Disconnect the suction hose (B) from the suction pipe.

[Diesel]

[Gasoline]

3. Remove the drive belt.

4. Loosen the power steering pump mounting bolts, and then remove the power steering pump assembly (A) from the

pump bracket.

Tightening torque Nm (kgf.m lb-ft):
17 ~ 26 (1.7 ~ 2.6, 12 ~ 19)

[Diesel]

Tightening torque Nm (kgf.m lb-ft):
38 ~ 47 (3.8 ~ 4.7, 27 ~ 34)
Tightening torque Nm (kgf.m lb-ft):
17 ~ 26 (1.7 ~ 2.6, 12 ~ 19)

[Diesel]

Tightening torque Nm (kgf.m lb-ft):
35 ~ 50 (3.5 ~ 5.0, 25 ~ 36)
Tightening torque Nm (kgf.m lb-ft):
17 ~ 26 (1.7 ~ 2.6, 12 ~ 19)
Tightening torque Nm (kgf.m lb-ft):
38 ~ 47 (3.8 ~ 4.7, 27 ~ 34)

[Gasoline]

Be careful not to spill fluid from the power steering oil pump.

INSTALLATION

1. Installation is the reverse of removal.

The pressure tube does not twist and come in contact with other components.

2. Add power steering fluid

3. Bleed the power steering system. (Refer to the air bleeding in ST group)

4. Check the oil pump pressure.

DISASSEMBLY

1. Remove two bolts from the oil pump body (A), and then remove the suction pipe (B) and O-ring.

2. Loosen the four bolts and remove the oil pump cover assembly (A) and the gasket.

3. Remove the rotor and vanes.

4. Remove the cam ring.

5. Remove the oil pump side plate (A).

6. Remove the inner and outer O-ring (A).