Kia Carnival (2009+). Instruction — part 345

5. Install the brake hose bracket bolt (A, B) to the axle assembly.

Tightening torque Nm (kgf.m, lb-ft) :
6.9 ~ 11 (0.7 ~ 1.1, 5.1 ~ 8.0)

6. Install the wheel and the tire (A) to the front hub (B).

Tightening torque Nm (kgf.m, lb-ft) :
90 ~ 110 (9 ~ 11, 65.1 ~ 79.5)

Be careful not to damage the hub bolts(C) when installing the front wheel and tire(A).

DISASSEMBLY

1. Using the special tool (09546-26000), compress the coil spring (A).

2. Remove the self-locking nut (C) from the strut assembly (B).

3. Remove the insulator, spring seat, coil spring and dust cover from the strut assembly.

INSPECTION

1. Check the strut insulator for wear or damage.

2. Check rubber parts for damage or deterioration.

3. Compress and extend the piston rod (A) and check that there is no abnormal resistance or unusual sound during

operation.

REASSEMBLY

1. Install the spring lower pad (D) so that the protrusions (A) fit in the holes (C) in the spring lower seat (B).

2. Compress coil spring using special tool (09546-26000).

Install compressed coil spring into shock absorber.

1) Indicated two identification color marks on the coil spring one follows model option the other follows load

classification according to the below.
Pay attention to distiuguish between the two marks and then install them.

2) Install the coil spring wth the identification mark directed toward the knuckle.

3. After fully extending the piston rod, install the spring upper seat and insulator assembly.

4. After seating the upper and lower ends of the coil spring (A) in the upper and lower spring seat grooves (B)

correctly, tighten new self-locking nut temporarily.

5. Remove the special tool (09546-26000).

6. Tighten the self-locking nut to the specified torque.

Tightening torque :
60 ~ 70 Nm (6 ~7 kgf.m, 43.4 ~ 50.6 lb-ft)

Suspension System

Front Suspension System - Front Lower Arm

Suspension System