Kia Carnival (2009+). Instruction — part 241
detected.
4. A Diagnostic Trouble Code(DTC) will automatically erase from ECM memory if the same malfunction is not detected
for 40 driving cycles.
• A "warm-up cycle" means sufficient vehicle operation such that the coolant temperature has risen by at least
40 degrees Fahrenheit from engine starting and reaches a minimum temperature of 160 degress Fahrenheit.
• A "driving cycle" consists of engine startup, vehicle operation beyond the beginning of closed loop operation.
2009 > G 2.7 DOHC >
COMPONENT LOCATION
1. PCM (Powertrain Control Module)
2. Mass Air Flow Sensor (MAFS)
3. Intake Air Temperature Sensor (IATS)
4. Manifold Absolute Pressure Sensor (MAPS)
17. ETC Module [Throttle Position Sensor (TPS) + ETC
Motor]
5. Engine Coolant Temperature Sensor (ECTS)
7. Camshaft Position Sensor (CMPS) [Bank2]
6. Camshaft Position Sensor (CMPS) [Bank 1]
8. Crankshaft Position Sensor (CKPS)
9. Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 1]
10. Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 2]
11. Heated Oxygen Sensor (HO2S) [Bank 2 / Sensor 1]
12. Heated Oxygen Sensor (HO2S) [Bank 2 / Sensor 2]
13. Knock Sensor (KS) [Bank 1]
14. Knock Sensor (KS) [Bank 2]
15. Injector
26. Ignition Coil
16. Accelerator Position Sensor (APS)
18. CVVT Oil Control Valve (OCV) [Bank 1]
19. CVVT Oil Control Valve (OCV) [Bank 2]
20. CVVT Oil Temperature Sensor (OTS)
21. Purge Control Solenoid Valve (PCSV)
22. Variable Intake Solenoid (VIS) #1 Valve (Surge Tank
Side)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст