Kia Sedona (2008 year). Instruction — part 377
2. Install oil filter body cover (B) and new gasket on the oil filter body.
Tightening torque
9.80-11.76 N.m (1.0-1.2 kgf.m, 7.23-8.68 lb-ft)
Fig. 242: Locating Oil Filter Body Cover
Courtesy of KIA MOTORS AMERICA, INC.
3. Connect water vent hose (A)
Tightening torque
9.80-11.76 N.m (1.0-1.2 kgf.m, 7.23-8.68 lb-ft)
4. Install water temperature control assembly. Refer to WATER TEMPERATURE CONTROL
ASSEMBLY.
5. Connect water hoses on the ETC.
6. Connect oil pressure switch connector.
7. Install intake manifold and surge tank. Refer to INTAKE MANIFOLD.
8. Fill with engine coolant.
9. Start engine and check for leaks.
10. Recheck engine coolant level.
INTAKE AND EXHAUST SYSTEM
COMPONENT
Always use a new O-ring
2008 Kia Sedona
2008 ENGINE Mechanical - Sedona
Microsoft
Saturday, May 22, 2010 3:54:38 PM
Page 166
© 2006 Mitchell Repair Information Company, LLC.
Fig. 243: Identifying Intake And Exhaust System Components And Torque Specifications (1 Of 3)
Courtesy of KIA MOTORS AMERICA, INC.
2008 Kia Sedona
2008 ENGINE Mechanical - Sedona
Microsoft
Saturday, May 22, 2010 3:54:38 PM
Page 167
© 2006 Mitchell Repair Information Company, LLC.
Fig. 244: Identifying Intake And Exhaust System Components And Torque Specifications (2 Of 3)
Courtesy of KIA MOTORS AMERICA, INC.
2008 Kia Sedona
2008 ENGINE Mechanical - Sedona
Microsoft
Saturday, May 22, 2010 3:54:39 PM
Page 168
© 2006 Mitchell Repair Information Company, LLC.
Fig. 245: Identifying Intake And Exhaust System Components And Torque Specifications (3 Of 3)
Courtesy of KIA MOTORS AMERICA, INC.
REMOVAL
INTAKE MANIFOLD
CAUTION:
Use fender covers to avoid damaging painted surfaces.
To avoid damage, unplug the wiring connectors carefully while
holding the connector portion.
2008 Kia Sedona
2008 ENGINE Mechanical - Sedona
Microsoft
Saturday, May 22, 2010 3:54:39 PM
Page 169
© 2006 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст