Kia Sedona (2008 year). Instruction — part 548
1. Wiper blade
Check the wear of wiper blade. If it is excessively worn, wipe out clean to sense the rain amount
accurately.
2. Coupler
Ensure the coupler surface on the windshield is free of bubbles. Verify that the coupler is properly
positioned.
3. Glass
Check the windshield glass surface beyond the sensing range for the excessive wear, scratch or crack.
Although the sensor compensates for wear to a certain level, sensor fails to sense accurately if it exceeds a
certain level. This is confirmed by the self-diagnosis of sensor.
4. Exterior cover
Ensure the exterior cover of the rain sensor is properly installed.
5. Spring clip
Check the spring clip after removal of exterior cover if the rain sensor is disconnected from coupler.
6. Connector
1. Check the terminal inside the connector and wiring for compression, and check the terminal
whether it is inserted and locked correctly.
2. In addition, check the wiring connector and rain sensor connector for assembly and confirm to
prevent poor connection
INSTALLATION
1. Install the rain sensor bracket to the windshield glass using the tape
NOTE:
In case of the windshield with reflection layer which reflects the infrared
rays in sensing field, remove the reflection layer from the rain sensor
mounting position prior to installation.
Bracket and spring slide need for installing the rain sensor, it is covered
by sensor cover.
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Windshield Wiper/Washer - Sedona
Microsoft
Monday, May 24, 2010 4:10:03 PM
Page 13
© 2006 Mitchell Repair Information Company, LLC.
Fig. 20: Installing Rain Sensor Bracket To Windshield Glass
Courtesy of KIA MOTORS AMERICA, INC.
2. Rain sensor Installation
The two springs should be closed simultaneously. Once closed, press the housing forward to ensure
proper adhesion of the sensor to the windshield.
Fig. 21: Installing Rain Sensor
Courtesy of KIA MOTORS AMERICA, INC.
3. Connect the rain sensor connector, and then install the sensor cover.
CAUTION: It is very important that the coupling pad pushes against the
windshield completely to prevent bubbles from forming at the
contact surface.
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Windshield Wiper/Washer - Sedona
Microsoft
Monday, May 24, 2010 4:10:03 PM
Page 14
© 2006 Mitchell Repair Information Company, LLC.
2008 SYSTEM WIRING DIAGRAMS
Kia - Sedona
USING MITCHELL1'S WIRING DIAGRAMS
For information on using these wiring diagrams, see USING MITCHELL1'S SYSTEM WIRING
DIAGRAMS article.
ANTI-LOCK BRAKES
2008 Kia Sedona
2008 SYSTEM WIRING DIAGRAMS Kia - Sedona
2008 Kia Sedona
2008 SYSTEM WIRING DIAGRAMS Kia - Sedona
Microsoft
Saturday, May 22, 2010 3:56:42 PM
Page 1
© 2006 Mitchell Repair Information Company, LLC.
Microsoft
Saturday, May 22, 2010 3:56:50 PM
Page 1
© 2006 Mitchell Repair Information Company, LLC.
2008 Kia Sedona
2008 SYSTEM WIRING DIAGRAMS Kia - Sedona
Microsoft
Saturday, May 22, 2010 3:56:42 PM
Page 2
© 2006 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст