Kia Sedona (2008 year). Instruction — part 75
DTC DETECTING CONDITION
DTC DETECTING CONDITION
SCHEMATIC DIAGRAM
Fig. 94: Passenger Airbag Telltale Lamp - Schematic Diagram
TERMINAL & CONNECTOR INSPECTION
Refer to TERMINAL & CONNECTOR INSPECTION.
INSPECTION PROCEDURE
1. PREPARATION
Refer to PREPARATION OF INSPECTION.
2. CHECK THE FUSE
DTC
Condition
Probable cause
B2502
Airbag fuse
Telltale Lamp Bulb
Open between Telltale Lamp and SRSCM
Short to ground or battery line between the Telltale Lamp and
SRSCM
SRSCM Malfunction
Fuse
Telltale Lamp
Bulb
Wiring Harness
SRSCM
2008 Kia Sedona EX
2008 RESTRAINTS Troubleshooting (Airbag) - Sedona
Microsoft
Monday, May 24, 2010 3:55:02 PM
Page 103
© 2006 Mitchell Repair Information Company, LLC.
1. Remove the airbag fuse and the airbag telltale lamp fuse from junction block.
2. Inspect the fuses. Are the fuses normal?
YES
Check the telltale lamp bulb.
NO
Repair or replace the fuses.
3. CHECK THE TELLTALE LAMP BULB
1. Remove the bulb from the instrument cluster.
2. Inspect the bulb. Is the bulb normal?
YES
Check source voltage.
NO
Repair or replace the bulb.
4. CHECK SOURCE VOLTAGE
1. Connect the battery negative cable to the battery.
2. Turn the ignition switch to ON.
3. Measure voltage between the terminal 5 of the Telltale Lamp harness connector and chassis
ground.
specification (voltage): 9-16 V
Fig. 95: Checking Source Voltage
4. Is the measured voltage within specification?
YES
2008 Kia Sedona EX
2008 RESTRAINTS Troubleshooting (Airbag) - Sedona
Microsoft
Monday, May 24, 2010 3:55:02 PM
Page 104
© 2006 Mitchell Repair Information Company, LLC.
Check short to battery line.
NO
Repair or replace the wiring harness between ignition switch and the Telltale Lamp.
5. CHECK SHORT TO BATTERY LINE
1. Measure voltage between the terminal 6 of the Telltale Lamp harness connector and chassis
ground.
specification (voltage): Approximately 0 V
Fig. 96: Checking Short To Battery Line
2. Is the measured voltage within specification?
YES
Check short or short to ground.
NO
Repair the short to battery line circuit on wiring harness between the SRSCM and the Telltale
Lamp.
6. CHECK SHORT OR SHORT TO GROUND
1. Turn the ignition switch to LOCK.
2. Disconnect the battery negative cable from the battery.
3. Measure resistance between the terminal 6 of the Telltale Lamp harness connector and chassis
ground.
4. Measure resistance between the terminal 5 and 6 of the Telltale Lamp harness connector.
specification (resistance): infinite
2008 Kia Sedona EX
2008 RESTRAINTS Troubleshooting (Airbag) - Sedona
Microsoft
Monday, May 24, 2010 3:55:02 PM
Page 105
© 2006 Mitchell Repair Information Company, LLC.
Fig. 97: Checking Short To Ground
5. Is the measured resistance within specification?
YES
Check open circuit.
NO
Repair the short or short to ground circuit on wiring harness between the SRSCM and the
Telltale Lamp.
7. CHECK OPEN CIRCUIT
1. Measure resistance between the terminal 6 of the Telltale Lamp harness connector and the terminal
18 (A) of SRSCM harness connector.
specification (resistance): below 1 ohms
Fig. 98: Checking Open Circuit
2. Is the measured resistance within specification?
YES
Go to next step.
NO
2008 Kia Sedona EX
2008 RESTRAINTS Troubleshooting (Airbag) - Sedona
Microsoft
Monday, May 24, 2010 3:55:02 PM
Page 106
© 2006 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст