Kia Sedona (2008 year). Instruction — part 128
Fig. 4: Identifying Brake Hose And Strut Assembly
Courtesy of KIA MOTORS AMERICA, INC.
4. Unstake the driveshaft lock nut using a chisel and hammer.
Fig. 5: Tapping Driveshaft Lock Nut
Courtesy of KIA MOTORS AMERICA, INC.
2008 Kia Sedona
2008 DRIVELINE/AXLES Front Axle - Sedona
Microsoft
Saturday, May 22, 2010 6:51:57 PM
Page 3
© 2006 Mitchell Repair Information Company, LLC.
Fig. 6: Identifying Driveshaft Lock Nut
Courtesy of KIA MOTORS AMERICA, INC.
5. Remove the driveshaft lock nut (A).
Tightening torque N.m (kgf.m, lb-ft):
245-275 (24.5-27.5, 177-199)
Fig. 7: Identifying Driveshaft Lock Nut
Courtesy of KIA MOTORS AMERICA, INC.
6. Remove the caliper assembly (A) from the knuckle and suspend it with wire.
Tightening torque N.m (kgf, m, lb-ft):
85-100 (8.5-10.0, 61-72)
2008 Kia Sedona
2008 DRIVELINE/AXLES Front Axle - Sedona
Microsoft
Saturday, May 22, 2010 6:51:57 PM
Page 4
© 2006 Mitchell Repair Information Company, LLC.
Fig. 8: Identifying Caliper Assembly And Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Fig. 9: Suspending Caliper With Wire
Courtesy of KIA MOTORS AMERICA, INC.
7. Remove the split pin and castle nut from the tie rod end ball joint.
Tightening torque N.m (Kgf.m, lb-ft):
60-80 (6.0-8.0, 43-58)
2008 Kia Sedona
2008 DRIVELINE/AXLES Front Axle - Sedona
Microsoft
Saturday, May 22, 2010 6:51:57 PM
Page 5
© 2006 Mitchell Repair Information Company, LLC.
Fig. 10: Identifying Split Pin And Castle Nut
Courtesy of KIA MOTORS AMERICA, INC.
8. Disconnect the tie rod end (A) from the knuckle using a SST (09568-4A000).
Fig. 11: Identifying Tie Rod End And Knuckle SST (09568-4A000)
Courtesy of KIA MOTORS AMERICA, INC.
9. Remove the split pin and lower arm bolt and nut (A).
Tightening torque N.m (Kgf.m, lb-ft):
90-120 (9.0-12.0, 65-87)
2008 Kia Sedona
2008 DRIVELINE/AXLES Front Axle - Sedona
Microsoft
Saturday, May 22, 2010 6:51:57 PM
Page 6
© 2006 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст