Kia Carnival (2007 year). Instruction — part 121
16. After loosening the castle nut and split pin, disconnect the upper arm (A) from the carrier assembly using a SST
(09562-4A000).
Tightening torque Nm (kgf.m, lb-ft):
90 ~ 100 (9.0 ~ 10.0, 65 ~ 72)
17. Remove the carrier assembly (A) from the trailing arm by loosening the bolts.
Tightening torque Nm (kgf.m, lb-ft):
80 ~ 110 (8.0 ~ 11.0, 58 ~ 80)
INSTALLATION
1. Installation is the reverse of removal.
a. The rear hub lock nut should be replaced with new ones.
b. After installation lock nut, stake the lock nut using a chisel and hammer as shown in the illustration below.
2. Check the rear hub & bearing assembly starting torque using a spring balance.
20 kgf.cm
INSPECTION
1. Check the hub for cracks and wear.
2. Check the brake disc for scoring and damage.
3. Check the carrier for cracks.
CHAPTER 9:
Suspension System
General Information
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст