Kia Carnival (2007 year). Instruction — part 431
INSPECTION
TURBO CHARGER
1. Warm up the engine to the normal temperature.
2. After removing the hose between the intake manifold and the intercooler, install the pressure gauge with 3-way
connector.
3. Measure the maximum pressure data by starting the engine and raising up the rpm.
PRESSURE GAUGE
INSPECTION
Not fixed pressure or low pressure
a. Leakage from the intake or exhaust system
b. Inferior turbocharger
Pressure is above the standard.
(630~670mmHg/3,800rpm)
a. Leakage from the inferior actuator hose
b. Actuator defect
ACTUATOR
1. After removing the air hose from the actuator, install the pressure tester.
2. Install the dial gauge in a straight line with the actuator rod.
3. Using the pressure tester, when the pressure, 1,320~1,360Hg is applied, check whether the actuator rod is shifted
2.0mm.
If the pressure more than 1.7 kg/cm²(1,250mmHg) is applied, there is a danger which the actuator will be
damaged.
4. Replace an actuator when it is not working or pressure can not be applied.
Front Exhaust Pipe
2007 > J2.9L DIESEL CRDI(VGT) >
COMPONENTS
2007 > J2.9L DIESEL CRDI(VGT) >
REMOVAL
1. Remove the front muffler(A).
Tightening torque:
39.2~58.8Nm (4.0~6.0kgf.m, 28.9~43.4lb-ft)
2. Remove the catalytic converter(A).
Tightening torque :
39.2~58.8Nm (4.0~6.0kgf.m, 28.9~43.4lb-ft)
3. Remove the center muffler(A).
Tightening torque :
39.2~58.8Nm (4.0~6.0kgf.m, 28.9~43.4lb-ft)
4. Remove the main muffler(A).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст