Kia Carnival (2007 year). Instruction — part 259

2. Lightly tighten the screws.

3. Wrap the striker with a shop towel, then adjust the striker by tapping it with a plastic hammer.

Do not tap the striker too hard.

4. Loosen the screws and remove the shop towel.

5. Lightly tighten the screws.

6. Hold the outer handle out, and push the door against the body to be sure the striker allows a flush fit. If the door

latches properly, tighten the screws and recheck.

Rear Door

2007 > 2.7L V6 GASOLINE >

COMPONENTS

2007 > 2.7L V6 GASOLINE >

REPLACEMENT

REAR DOOR TRIM REPLACEMENT

a. Take care not to scratch the door trim and other parts.

b. Put on gloves to protect your hands.

1. Remove the front side trim(A) and rear side trim.

2. Disconnect the clip (A), remove the inside handle (B).

3. Loosen the inside handle cover (A) mounting screws, remove the inside handle cover.

4. Loosen the trim (A) mounting screws, remove the trim.