Kia Carnival (2007 year). Instruction — part 533

2007 > 3.8L V6 GASOLINE >

REMOVAL

a. Use fender covers to avoid damaging painted surfaces.
b. To avoid damage, unplug the wiring connectors carefully while holding the connector portion.

a. Mark all wiring and hoses to avoid misconnection.
b. Turn the crankshaft pulley so that the No.1 piston is at top dead center.

1. Disconnect the battery negative cable (A).

2. Remove the engine cover (A).

3. Remove the intake air hose and air cleaner assembly.

(1) Disconnect the MAF sensor connector (A).

(2) Disconnect the breather hose (B) from air intake hose.

(3) Remove the intake air hose and air cleaner assembly(C).

4. Remove the RH front wheel.

5. Remove the under cover (A).

6. Remove the side cover.

7. Loosen the drain plug and drain the engine coolant.

8. Drain the engine oil.

9. Remove the surge tank.

(1) Disconnect the RH oxygen sensor connector (A) and loosen the power steering hose mounting bolts (B).

(2) Disconnect the RH injector connector (A) and ignition coil connector (B).

(3) Disconnect the PCSV connector (A), MAP sensor connector (B) and PCSV hose.

(4) Disconnect the ETC connector (A) and knock sensor connector (B).

(5) Disconnect the OCV connector (A) and knock sensor connector (B).

(6) Disconnect the LH front oxygen sensor connector (A).

(7) Disconnect the LH ignition coil connector (A), injector connector (B), condenser connector (C) and ground (D),

and remove the wiring harness protector (E).

(8) Disconnect the LH CMPS (A) and oil pressure switch connector (B).

(9) Remove the ETC bracket (A).

(10) Disconnect the water hoses (B) from ETC.

(11) Disconnect the PCV hose (C).