Kia Carnival (2007 year). Instruction — part 398
20. Install the crankshaft pulley bolt(A), washer(B) and crankshaft pulley (A).
Tightening torque :
376.6~411.9Nm (38.4~42.0kgf.m, 277.7~303.8lb-ft)
Using the special tool(09517-21700, 09231-H1000), tighten the bolt(A).
21. Install the bolts(B), nut(C) and timing belt upper cover (A).
Tightening torque :
6.9~9.8Nm (0.7 ~ 1.0kgf.m, 5.1 ~ 7.2lb-ft)
22. Install the water pump pulley.
Tightening torque :
5.9~9.8Nm (0.6 ~ 1.0kgf.m, 4.3 ~ 7.2lb-ft)
23. Install the drive belt.
24. Confirm that the 'A' part of the drivebelt auto-tensioner is positioned as shown below. If not, replace the belt.
25. Install the engine support bracket(A).
Tightening torque :
49.0~63.7Nm (5.0 ~ 6.5kgf.m, 36.2 ~ 47.0lb-ft)
26. Install the engine mounting (A).
Tightening torque :
88.3~107.9Nm (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
27. Remove the jack for oil pan.
28. Install the battery terminals (A).
2007 > J2.9L DIESEL CRDI(VGT) >
SPECIFICATIONS
Description
Specifications(J3 - ENG)
Limit
General
Type
In-line, DOHC
Number of cylinders
4
Bore
101.5~101.526mm (3.9961~3.9971in)
Stroke
98mm (8.8583in)
Total displacement
2,902 cc (177.08 cu.in)
Compression ratio
18.4 : 1
Firing order
1-3-4-2
Valve timing
Intake valve
Opens (ATDC)
26°
Closes (ABDC)
50°
Exhaust valve
Opens (BBDC)
72°
Closes (ATDC)
32°
Cylinder head
Flatness of gasket surface
Less than 0.05mm (0.0020in)
Flatness of manifold
mounting surface
Intake
Less than 0.15mm (0.0059in)
Exhaust
Less than 0.15mm (0.0059in)
Camshaft
Cam height
Intake
39.397 ~ 39.597mm (1.5511 ~ 1.5589in)
Exhaust
39.4932 ~ 39.6932mm (1.5548 ~ 1.5627in)
Journal outer Diameter (Intake, Exhaust)
27.941 ~ 27.960mm (1.1000 ~ 1.1008in)
Bearing oil clearance
0.040 ~ 0.080mm (0.0016 ~ 0.0031in)
End play
0.08 ~ 0.17mm (0.0031 ~ 0.0067in)
Valve
Valve length
Intake
126.24mm (4.9701in)
Exhaust
126.24mm (4.9701in)
Stem outer diameter
Intake
6.965 ~ 6.980mm (0.2742 ~ 0.2748in)
Exhaust
6.945 ~ 6.960mm (0.2734 ~ 0.2740in)
Face angle
45°
Thickness of valve
head (margin)
Intake
1.7mm (0.0669in)
Exhaust
1.6mm (0.0630in)
Valve stem to valve
guide clearance
Intake
0.030 ~ 0.065mm (0.0012 ~ 0.0026in)
Exhaust
0.050 ~ 0.085mm ( 0.0020~ 0.0033in)
Valve guide
Length
Intake
52.5mm (2.0669in)
Exhaust
52.5mm (2.0669in)
Valve seat
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст