Kia Carnival (2007 year). Instruction — part 475

6. Remove the PCV(Positive Crankcase Ventilation) hose(A), EGR valve vacuum hose(B), EGR cooler water hose(C),

pump vacuum oil hose(D).

7. Remove the intercooler hose(A,C), pipe(B).

8. Remove the wiring connectors and clamps from cylinder head and intake manifold.

(1) Remove the generator connector (A) and ETC(Engine Coolant Temperature) sensor connector (B).

(2) Remove the injector connector(A), common rail pressure sensor connector(B), wire harness protector(C).

(3) Remove the ground cable(A) from cylinder head.

(4) Remove the knock sensor connector (A), high pressure pump fuel hose (B), high pressure pump connector(C).

(5) Remove the air conditioner condenser (A).

(6) Remove the oil pressure switch connector (A).

(7) Remove the air heater (A), CMP (Camshaft Position Sensor) connector (B).

9. Remove the injection pipe, injector. (Refer to FL- injector.)

10. Remove the exhaust manifold.

11. Remove the intake manifold.

12. Remove the timing belt.

13. Remove the hose(C, D) and pipe (E) from. the ventilation housing(A) and the air separator(B).

14. Remove the oil pipe (B) and hose(C) from the generator vacuum pump (A).

15. Remove the generator fixing bolts(B,C), nuts(D) and then the generator(A).

16. After removing the water hose(C) from the thermostat housing (B), remove the generator fixing bracket (A) and

the thermostat housing (B).

17. Remove the cylinder head cover(A).

Была ли эта страница вам полезна?
Да!Нет
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности