Mazda CX-9 (2019 year). Manual — part 34
Light Bulbs
Type A (With Adaptive Front Lighting System (AFS))
Type B (Without Adaptive Front Lighting System (AFS))
Rear side-marker lights
Rear turn signal lights
Brake lights
License plate lights
Headlights (Low/High beam)
High-mount brake light
Overhead lights (Front)/
Map lights (Front)
Luggage compartment light
Vanity mirror lights
Daytime running lights/
Parking lights
Taillights
Ambient lights
Reverse lights
Fog lights
Front turn signal lights
Fog lights
Map lights (Center)
Overhead light (Rear)
Rear side-marker lights
Rear turn signal lights
Brake lights
License plate lights
Headlights (Low/High beam)/
Daytime running lights
High-mount brake light
Overhead lights (Front)/
Map lights (Front)
Luggage compartment light
Vanity mirror lights
Reverse lights
Front turn signal lights
Map lights (Center)
Overhead light (Rear)
Parking lights/Front
side-marker lights
Front side-marker lights
Some models.
Side turn
signal lights
Side turn
signal lights
Signature wing
illumination
Brake lights/Taillights
Brake lights/Taillights
Ambient lights
Maintenance and Care
Owner Maintenance
6-42
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
CAUTION
When removing the lens or lamp unit using
a flathead screwdriver, make sure that the
flathead screwdriver does not contact the
interior terminal. If the flathead screwdriver
contacts the terminal, a short circuit may
occur.
NOTE
To replace the bulb, contact an
Authorized Mazda Dealer.
Use the protective cover and carton for
the replacement bulb to dispose of the
old bulb promptly and out of the reach
of children.
▼ Replacing Exterior Light Bulbs
The exterior lights have either LEDs or
normal bulbs.
LED type
Headlights (type A)
Headlights/Daytime running lights (type
B)
Front turn signal lights (type A)
Daytime running lights/Parking lights
(type A)
Front side-marker lights (type A)
Signature wing illumination (type A)
*
Fog lights
*
Brake lights
Taillights
High-mount brake light
Side turn signal lights
Rear side-marker lights
License plate lights
The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorized
Mazda Dealer when the replacement is
necessary.
Bulb type
Front turn signal lights (type B),
Parking lights/Front side-marker lights
(type B)
NOTE
When replacing a bulb for the front turn
signal lights and parking lights/front
side-marker lights, turn the steering wheel
and change the direction in which the tires
are pointed to the position where the bulb
replacement can be done easily.
Turn the steering wheel after starting the
engine and stop the engine after you finish
turning the steering wheel.
1. If you are changing the right bulb, start
the engine, turn the steering wheel all
the way to the right, and turn off
engine. If you are changing the left
bulb, turn the steering wheel to the left,
and turn off engine.
2. Make sure the ignition is switched off,
and the headlight switch is off.
Maintenance and Care
Owner Maintenance
*Some models.
6-43
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
3. Turn the screw counterclockwise and
remove it.
4. Pull the center of each plastic retainer
and remove the retainers, and then
partially peel back the mudguard.
Removal
Installation
5. Disconnect the wiring harness by
releasing the clamp.
6. Turn the socket and bulb assembly
counterclockwise and remove it.
7. Disconnect the bulb from the socket.
Front turn signal lights
Maintenance and Care
Owner Maintenance
6-44
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
Parking lights/Front side-marker
lights
8. Install the new bulb in the reverse
order of the removal procedure.
NOTE
There will be no problem with
functionality with the wiring harness
disconnected in Step 5 left
disconnected.
Therefore, there is no need to connect
the wiring harness.
Rear turn signal lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Remove the cover.
3. Turn the screws counterclockwise and
remove them.
4. Pull the unit rearward to remove it.
5. Disconnect the wiring harness by
releasing the clamp.
Maintenance and Care
Owner Maintenance
6-45
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
6. Turn the socket and bulb assembly
counterclockwise and remove it.
7. Temporarily install the light unit with
the socket pulled out of the top of the
light unit.
Socket pull-out range
CAUTION
The wiring harness may be damaged
when temporarily installing the light
unit. When performing the
procedure, observe the following
points.
Pull out the socket from within the
socket pull-out range shown in the
figure.
Do not push the light unit into the
vehicle with force.
When temporarily installing the light
unit, cover the rear bumper light unit
installation surface with a soft cloth.
The rear bumper may be scratched or
damaged if the light unit contacts it.
8. Disconnect the bulb from the socket.
9. Install the new bulb in the reverse
order of the removal procedure.
Reverse lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Remove the cover.
Maintenance and Care
Owner Maintenance
6-46
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
3. Disconnect the electrical connector
from the bulb by pressing the tab on
the connector with your finger and
pulling the connector.
4. Turn the socket and bulb assembly
counterclockwise and remove it.
5. Disconnect the bulb from the socket.
6. Install the new bulb in the reverse
order of the removal procedure.
▼ Replacing Interior Light Bulbs
Overhead lights (Front)/Map lights
(Front) (LED type), Overhead lights
(Center)/Map lights (Center) (LED
type), Overhead lights (Rear) (LED
type), Vanity mirror lights (LED type),
Ambient lights
The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorized
Mazda Dealer when the replacement is
necessary.
Overhead lights (Front)/Map lights
(Front) (bulb type), Overhead lights
(Center)/Map lights (Center) (bulb
type), Overhead light (Rear) (bulb
type), Vanity mirror lights (bulb type)
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with the flathead screwdriver.
2. Disconnect the bulb by pulling it out.
Maintenance and Care
Owner Maintenance
6-47
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
Overhead lights (Front)/Map lights
(Front)
Overhead lights (Center)/Map lights
(Center)
Forward
Overhead light (Rear)
Edge
Forward
Maintenance and Care
Owner Maintenance
6-48
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
Vanity mirror lights
3. Install the new bulb in the reverse
order of the removal procedure.
Luggage compartment light
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens and remove the lens unit by
carefully prying on the edge of the lens
unit with the flathead screwdriver.
2. Disconnect the electrical connector
from the bulb by pressing the tab on
the connector with your finger and
pulling the connector.
CAUTION
When replacing the bulb always
disconnect the connector first.
Otherwise, electric and electronic
devices could be shorted.
3. Insert the flathead screwdriver into the
gap between the lens and the lens unit,
and then slide the screwdriver to
detach the lens.
Maintenance and Care
Owner Maintenance
6-49
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
4. Disconnect the bulb by pulling it out.
5. Install the new bulb in the reverse
order of the removal procedure.
Fuses
Your vehicle's electrical system is
protected by fuses.
If any lights, accessories, or controls do
not work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.
If the same fuse blows again, avoid using
that system and consult an Authorized
Mazda Dealer as soon as possible.
▼ Fuse Replacement
Replacing the fuses on the vehicle's left
side
If the electrical system does not work, first
inspect the fuses on the vehicle's left side.
1. Make sure the ignition is switched off,
and other switches are off.
2. Open the fuse panel cover.
Maintenance and Care
Owner Maintenance
6-50
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
3. Pull the fuse straight out with the fuse
puller provided on the fuse block
located in the engine compartment.
4. Inspect the fuse and replace it if it is
blown.
Normal
Blown
5. Insert a new fuse of the same
amperage rating, and make sure it fits
tightly. If it does not fit tightly, have an
expert install it. We recommend an
Authorized Mazda Dealer.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the AUDIO or OUTLET circuit.
CAUTION
Always replace a fuse with a genuine
Mazda fuse or equivalent of the same
rating. Otherwise you may damage the
electric system.
6. Reinstall the cover and make sure that
it is securely installed.
Replacing the fuses under the hood
If the headlights or other electrical
components do not work and the fuses in
the cabin are normal, inspect the fuse
block under the hood.
If a fuse is blown, it must be replaced.
Follow these steps:
1. Make sure the ignition is switched off,
and other switches are off.
2. Remove the fuse block cover.
3. If any fuse but the MAIN fuse is
blown, replace it with a new one of the
same amperage rating.
Normal
Blown
Maintenance and Care
Owner Maintenance
6-51
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
WARNING
Do not replace the main fuse by
yourself. Have an Authorized Mazda
Dealer perform the replacement:
Replacing the fuse by yourself is
dangerous because the MAIN fuse is a
high current fuse. Incorrect
replacement could cause an electrical
shock or a short circuit resulting in a
fire.
4. Reinstall the cover and make sure that
it is securely installed.
Maintenance and Care
Owner Maintenance
6-52
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
▼ Fuse Panel Description
Fuse block (Engine compartment)
DESCRIPTION
FUSE
RATING
PROTECTED COMPONENT
1
WIPER.DEI
20 A
Windshield wiper de-icer
*
2
IG2
30 A
For protection of various circuits
3
INJECTOR
30 A
Engine control system
4
―
―
―
5
P.WINDOW1
30 A
―
6
―
―
―
7
―
―
―
8
EVVT
20 A
Engine control system
9
DEFOG
40 A
Rear window defogger
10
ST.HEATER2
20 A
―
11
R.HEATER
40 A
Air conditioner
12
EPB L
20 A
Electric Parking Brake (EPB) (LH)
13
AUDIO
40 A
Audio system
14
EPB R
20 A
Electric Parking Brake (EPB) (RH)
15
ENG.MAIN
40 A
Engine control system
16
ABS/DSC M
50 A
ABS, Dynamic stability control system
17
CABIN.+B
50 A
For protection of various circuits
18
WIPER
20 A
Front window wiper and washer
19
HEATER
40 A
Air conditioner
Maintenance and Care
Owner Maintenance
*Some models.
6-53
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
DESCRIPTION
FUSE
RATING
PROTECTED COMPONENT
20
―
―
―
21
ENGINE.IG1
7.5 A
Engine control system
22
C/U IG1
15 A
For protection of various circuits
23
H/L LOW L
15 A
Headlight low beam (LH)
24
H/L LOW R1
15 A
―
25
ENGINE3
15 A
Engine control system
26
ENGINE2
15 A
Engine control system
27
ENGINE1
15 A
Engine control system
28
AT
15 A
Transaxle control system, Ignition switch
29
H/CLEAN
20 A
―
30
A/C
7.5 A
Air conditioner
31
AT PUMP
15 A
―
32
STOP
10 A
Brake lights
33
R.WIPER
15 A
Rear window wiper, Theft-deterrent system
*
34
H/L HI
20 A
Headlight high beam
35
H/L LOW R2
15 A
Headlight low beam (RH)
36
FOG
15 A
Fog lights
*
37
ENG.+B
7.5 A
Engine control system
38
AUDIO2
7.5 A
Audio system
39
INTERIOR
10 A
For protection of various circuits
40
METER2
15 A
―
41
METER1
10 A
Instrument cluster
42
SRS1
7.5 A
Air bag
43
AUDIO4
10 A
Audio system
*
44
AUDIO1
25 A
Audio system
45
ABS/DSC S
30 A
ABS, Dynamic stability control system
46
―
―
―
47
ST.HEATER
15 A
Heated steering wheel
*
48
TAIL
15 A
Parking lights
49
FUEL PUMP2
25 A
Fuel system
50
HAZARD
25 A
Hazard warning flashers, Turn signal lights, Taillights
51
DRL
15 A
Daytime running lights
52
R.OUTLET2
15 A
Accessory sockets
*
53
HORN
15 A
Horn
54
ROOM
25 A
For protection of various circuits
Maintenance and Care
Owner Maintenance
6-54
*Some models.
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
Fuse block (Left side)
DESCRIPTION
FUSE
RATING
PROTECTED COMPONENT
1
P.SEAT D
30 A
Power seat
*
2
P.WINDOW3
30 A
Power windows
3
R.OUTLET3
15 A
Accessory sockets
4
P.WINDOW2
25 A
Power windows
5
PLG
20 A
Power liftgate
*
6
D.LOCK
25 A
Power door locks
7
SEAT WARM
20 A
Seat warmer
*
8
SRS2/ESCL
15 A
Trailer hitch
*
9
SUNROOF
10 A
Moonroof
*
10
INTERIOR2
15 A
Audio system
11
ENG+BB
7.5 A
Engine control system
12
MIRROR
7.5 A
Power control mirror
13
AT IND
7.5 A
AT shift indicator
14
F.OUTLET
15 A
Accessory sockets
15
R.OUTLET1
15 A
Accessory sockets
*
16
―
―
―
Maintenance and Care
Owner Maintenance
*Some models.
6-55
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
DESCRIPTION
FUSE
RATING
PROTECTED COMPONENT
17
M.DEF
7.5 A
Mirror defogger
*
18
R.SEAT.WARM
20 A
Seat warmer
*
19
AUDIO3
15 A
Audio system
20
―
―
―
21
P.SEAT P
30 A
Power seat
*
Maintenance and Care
Owner Maintenance
6-56
*Some models.
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
Exterior Care
The paintwork on your Mazda represents
the latest technical developments in
composition and methods of application.
Environmental hazards, however, can
harm the paint's protective properties, if
proper care is not taken.
Here are some examples of possible
damage, with tips on how to prevent them.
Etching Caused by Acid Rain or
Industrial Fallout
Occurrence
Industrial pollutants and vehicle emissions
drift into the air and mix with rain or dew
to form acids. These acids can settle on a
vehicle's finish. As the water evaporates,
the acid becomes concentrated and can
damage the finish.
And the longer the acid remains on the
surface, the greater the chance is for
damage.
Prevention
It is necessary to wash and wax your
vehicle to preserve its finish according to
the instructions in this section. These steps
should be taken immediately after you
suspect that acid rain has settled on your
vehicle's finish.
Damage Caused by Bird Dropping,
Insects, or Tree Sap
Occurrence
Bird droppings contain acids. If these are
not removed they can eat away the clear
and color base coat of the vehicle's
paintwork.
When insects stick to the paint surface and
decompose, corrosive compounds form.
These can erode the clear and color base
coat of the vehicle's paintwork if they are
not removed.
Tree sap will harden and adhere
permanently to the paint finish. If you
scratch the sap off while it is hard, some
vehicle paint could come off with it.
Prevention
It is necessary to have your Mazda washed
and waxed to preserve its finish according
to the instructions in this section. This
should be done as soon as possible.
Bird droppings can be removed with a soft
sponge and water. If you are traveling and
these are not available, a moistened tissue
may also take care of the problem. The
cleaned area should be waxed according to
the instructions in this section.
Insects and tree sap are best removed with
a soft sponge and water or a commercially
available chemical cleaner.
Another method is to cover the affected
area with dampened newspaper for 1 to 2
hours. After removing the newspaper,
rinse off the loosened debris with water.
Maintenance and Care
Appearance Care
6-57
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст