Mazda 3 Hatchback (2018 year). Manual — part 27
Maintenance Interval
Number of months or kilometers (miles), whichever comes first.
Months
6
12
18
24
30
36
42
48
54
60
66
72
×1000 km
8
16
24
32
40
48
56
64
72
80
88
96
×1000 miles
5
10
15
20
25
30
35
40
45
50
55
60
CHASSIS and BODY
Brake lines, hoses and connections
I
I
I
Brake and clutch fluid level
I
I
I
I
I
I
I
I
I
I
I
I
Disc brakes
I
I
I
I
I
I
Tire (Rotation)
*5
Rotate when any equivalent timing of replacing engine oil.
(Max interval: 8,000 km (5,000 miles))
Tire inflation pressure and tire wear
*5
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
I
I
I
Front and rear suspension, ball joints and wheel
bearing axial play
I
I
I
Driveshaft dust boots
I
I
I
Bolts and nuts on chassis and body
T
T
T
Exhaust system and heat shields
Inspect every 72,000 km (45,000 miles) or 5 years.
All locks and hinges
L
L
L
L
L
L
L
L
L
L
L
L
Washer fluid level
I
I
I
I
I
I
I
I
I
I
I
I
Emergency flat tire repair kit (if installed)
*6
Inspect annually.
AIR CONDITIONER SYSTEM
Cabin air filter
Replace every 40,000 km (25,000 miles) or 2 years.
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
L: Lubricate
T: Tighten
Remarks:
*
1 Engine oil flexible maintenance is available for U.S.A. and Puerto Rico residents whose vehicle is operated
mainly where none of the following conditions apply.
Extended periods of idling or low-speed operation such as police car, taxi or driving school car
Driving in dusty conditions
If any do apply, follow fixed maintenance.
The engine oil and filter must be changed at least once a year or within 12,000 km (7,500 miles) since last
engine oil and filter change. Reset the engine oil data whenever replacing the engine oil regardless of the
message/wrench indicator light display.
*
2 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.
*
3 If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air filter more often
than the recommended intervals.
Maintenance and Care
Scheduled Maintenance
6-7
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
*
4 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or mileage/kilometer period to ensure long-term reliability.
*
5 The Tire Pressure Monitoring System (TPMS) initialization must be performed so that the system operates
normally (if equipped).
*
6 Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the
tire repair fluid bottle with new one before the expiration date.
Canada residents
Maintenance Interval
Number of months or kilometers (miles), whichever comes first.
Months
6
12
18
24
30
36
42
48
54
60
66
72
×1000 km
8
16
24
32
40
48
56
64
72
80
88
96
×1000 miles
5
10
15
20
25
30
35
40
45
50
55
60
ENGINE
Drive belts
I
I
Engine oil & filter
*1
R
R
R
R
R
R
R
R
R
R
R
R
COOLING SYSTEM
Engine coolant
*2
Replace at first 192,000 km (120,000 miles) or 10 years; after
that, every 96,000 km (60,000 miles) or 5 years.
Engine coolant level
I
I
I
I
I
I
I
I
I
I
I
I
FUEL SYSTEM
Air filter
I
I
I
I
I
I
I
I
I
I
I
I
Replace every 56,000 km (35,000 miles) or 3 years.
Fuel lines and hoses
*3
I
I
I
Hoses and tubes for emission
*3
I
IGNITION SYSTEM
Spark plugs
Replace every 120,000 km (75,000 miles).
ELECTRICAL SYSTEM
Function of all lights
I
I
I
I
I
I
I
I
I
I
I
I
CHASSIS and BODY
Brake lines, hoses and connections
I
I
I
Brake and clutch fluid level
I
I
I
I
I
I
I
I
I
I
I
I
Disc brakes
Inspect every 24,000 km (15,000 miles) or 1 years.
Tire (Rotation)
*4
Rotate every 8,000 km (5,000 miles).
Tire inflation pressure and tire wear
*4
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
I
I
I
Front and rear suspension, ball joints and wheel
bearing axial play
I
I
I
Driveshaft dust boots
I
I
I
Maintenance and Care
Scheduled Maintenance
6-8
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
Maintenance Interval
Number of months or kilometers (miles), whichever comes first.
Months
6
12
18
24
30
36
42
48
54
60
66
72
×1000 km
8
16
24
32
40
48
56
64
72
80
88
96
×1000 miles
5
10
15
20
25
30
35
40
45
50
55
60
Bolts and nuts on chassis and body
T
T
T
Exhaust system and heat shields
Inspect every 72,000 km (45,000 miles) or 5 years.
All locks and hinges
L
L
L
L
L
L
L
L
L
L
L
L
Washer fluid level
I
I
I
I
I
I
I
I
I
I
I
I
Emergency flat tire repair kit (if installed)
*5
Inspect annually.
AIR CONDITIONER SYSTEM
Cabin air filter
Replace every 40,000 km (25,000 miles) or 2 years.
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
L: Lubricate
T: Tighten
Remarks:
*
1 Reset the engine oil data whenever replacing the engine oil regardless of the message/wrench indicator light
display.
*
2 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.
*
3 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or mileage/kilometer period to ensure long-term reliability.
*
4 The Tire Pressure Monitoring System (TPMS) initialization must be performed so that the system operates
normally (if equipped).
*
5 Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the
tire repair fluid bottle with new one before the expiration date.
Maintenance and Care
Scheduled Maintenance
6-9
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
Scheduled Maintenance (Mexico)
Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions
(severe driving conditions) apply.
Repeated short-distance driving
Driving in dusty conditions
Driving with extended use of brakes
Driving in areas where salt or other corrosive materials are used
Driving on rough or muddy roads
Extended periods of idling or low-speed operation
Driving for long periods in cold temperatures or extremely humid climates
Driving in extremely hot conditions
Driving in mountainous conditions continually
If any do apply, follow Schedule 2.
NOTE
For maintenance guidelines beyond the kilometers/months listed, follow the maintenance
intervals provided in the Scheduled Maintenance Tables.
▼ Schedule 1
Maintenance Interval
Number of months or kilometers, whichever comes first
Months
6
12
18
24
30
36
42
48
54
60
66
72
×1000 km
10
20
30
40
50
60
70
80
90 100 110 120
ENGINE
Drive belts
I
I
I
Engine oil & filter
R
R
R
R
R
R
R
R
R
R
R
R
COOLING SYSTEM
Cooling system
I
I
I
Engine coolant
*1
Replace at first 200,000 km or 10 years; after that, every
100,000 km or 5 years
FUEL SYSTEM
Air filter
R
R
R
R
R
R
Fuel lines and hoses
I
*2
I
*2
I
Hoses and tubes for emission
I
*2
I
*2
I
Fuel filter
Replace every 60,000 km
IGNITION SYSTEM
Spark plugs
I
I
I
I
I
I
I
I
I
I
I
I
Replace every 120,000 km
Maintenance and Care
Scheduled Maintenance
6-10
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
Maintenance Interval
Number of months or kilometers, whichever comes first
Months
6
12
18
24
30
36
42
48
54
60
66
72
×1000 km
10
20
30
40
50
60
70
80
90 100 110 120
CHASSIS and BODY
Brake lines, hoses and connections
I
I
I
I
I
I
Brake and clutch fluid level
I
I
I
I
I
I
I
I
I
Brake fluid
R
R
R
Disc brakes
I
I
I
I
I
I
I
I
I
I
I
I
Tire (Rotation)
*3
Rotate every 10,000 km
Tire inflation pressure and tire wear
*3
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
I
I
I
I
I
I
I
I
I
I
I
I
Front and rear suspension, ball joints and wheel
bearing axial play
I
I
I
I
I
I
Driveshaft dust boots
I
I
I
I
I
I
Bolts and nuts on chassis and body
T
T
T
T
T
T
Exhaust system and heat shields
I
I
I
I
I
I
All locks and hinges
L
L
L
L
L
L
L
L
L
L
L
L
Washer fluid level
I
I
I
I
I
I
I
I
I
I
I
I
Emergency flat tire repair kit (if installed)
*4
Inspect annually.
AIR CONDITIONER SYSTEM
Cabin air filter
R
R
R
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
L: Lubricate
T: Tighten
Remarks:
*
1 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.
*
2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or kilometer period to ensure long-term reliability.
*
3 The Tire Pressure Monitoring System (TPMS) initialization must be performed so that the system operates
normally (if equipped).
*
4 Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the
tire repair fluid bottle with new one before the expiration date.
Maintenance and Care
Scheduled Maintenance
6-11
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
▼ Schedule 2
Maintenance Interval
Number of months or kilometers, whichever comes first
Months
3
6
9
12
15
18
21
24
27
30
33
36
×1000 km
5
10
15
20
25
30
35
40
45
50
55
60
ENGINE
Drive belts
I
Engine oil & filter
R
R
R
R
R
R
R
R
R
R
R
R
COOLING SYSTEM
Cooling system
I
Engine coolant
*1
Replace at first 200,000 km or 10 years; after that, every
100,000 km or 5 years
Engine coolant level
I
I
I
I
I
I
I
I
I
I
I
I
FUEL SYSTEM
Air filter
C
R
C
R
C
R
Fuel lines and hoses
I
*2
Hoses and tubes for emission
I
*2
Fuel filter
Replace every 60,000 km
Maintenance and Care
Scheduled Maintenance
6-12
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
Maintenance Interval
Number of months or kilometers, whichever comes first
Months
3
6
9
12
15
18
21
24
27
30
33
36
×1000 km
5
10
15
20
25
30
35
40
45
50
55
60
IGNITION SYSTEM
Spark plugs
I
I
I
I
I
I
Replace every 120,000 km
ELECTRICAL SYSTEM
Function of all lights
I
I
I
I
I
I
I
I
I
I
I
I
CHASSIS and BODY
Brake lines, hoses and connections
I
I
I
Brake and clutch fluid level
I
I
I
I
I
Brake fluid
R
Disc brakes
I
I
I
I
I
I
Tire (Rotation)
*3
Rotate every 10,000 km
Tire inflation pressure and tire wear
*3
I
I
I
I
I
I
Steering operation and linkages
I
I
I
I
I
I
Front and rear suspension, ball joints and wheel
bearing axial play
I
I
I
Driveshaft dust boots
I
I
I
Bolts and nuts on chassis and body
T
T
T
Exhaust system and heat shields
I
I
I
All locks and hinges
L
L
L
L
L
L
Washer fluid level
I
I
I
I
I
I
Emergency flat tire repair kit (if installed)
*4
Inspect annually.
AIR CONDITIONER SYSTEM
Cabin air filter
R
R
R
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
L: Lubricate
C: Clean
T: Tighten
Remarks:
*
1 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.
*
2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or kilometer period to ensure long-term reliability.
*
3 The Tire Pressure Monitoring System (TPMS) initialization must be performed so that the system operates
normally (if equipped).
Maintenance and Care
Scheduled Maintenance
6-13
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
*
4 Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the
tire repair fluid bottle with new one before the expiration date.
(Cont.)
Maintenance Interval
Number of months or kilometers, whichever comes first
Months
39
42
45
48
51
54
57
60
63
66
69
72
×1000 km
65
70
75
80
85
90
95 100 105 110 115 120
ENGINE
Drive belts
I
I
Engine oil & filter
R
R
R
R
R
R
R
R
R
R
R
R
COOLING SYSTEM
Cooling system
I
I
Engine coolant
*1
Replace at first 200,000 km or 10 years; after that, every
100,000 km or 5 years
Engine coolant level
I
I
I
I
I
I
I
I
I
I
I
I
FUEL SYSTEM
Air filter
C
R
C
R
C
R
Fuel lines and hoses
I
*2
I
Hoses and tubes for emission
I
*2
I
Fuel filter
Replace every 60,000 km
IGNITION SYSTEM
Spark plugs
I
I
I
I
I
I
Replace every 120,000 km
ELECTRICAL SYSTEM
Function of all lights
I
I
I
I
I
I
I
I
I
I
I
I
CHASSIS and BODY
Brake lines, hoses and connections
I
I
I
Brake and clutch fluid level
I
I
I
I
Brake fluid
R
R
Disc brakes
I
I
I
I
I
I
Tire (Rotation)
*3
Rotate every 10,000 km
Tire inflation pressure and tire wear
*3
I
I
I
I
I
I
Steering operation and linkages
I
I
I
I
I
I
Front and rear suspension, ball joints and wheel
bearing axial play
I
I
I
Driveshaft dust boots
I
I
I
Bolts and nuts on chassis and body
T
T
T
Exhaust system and heat shields
I
I
I
All locks and hinges
L
L
L
L
L
L
Maintenance and Care
Scheduled Maintenance
6-14
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
Maintenance Interval
Number of months or kilometers, whichever comes first
Months
39
42
45
48
51
54
57
60
63
66
69
72
×1000 km
65
70
75
80
85
90
95 100 105 110 115 120
Washer fluid level
I
I
I
I
I
I
Emergency flat tire repair kit (if installed)
*4
Inspect annually.
AIR CONDITIONER SYSTEM
Cabin air filter
R
R
R
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
L: Lubricate
C: Clean
T: Tighten
Remarks:
*
1 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.
*
2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or kilometer period to ensure long-term reliability.
*
3 The Tire Pressure Monitoring System (TPMS) initialization must be performed so that the system operates
normally (if equipped).
*
4 Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the
tire repair fluid bottle with new one before the expiration date.
Maintenance and Care
Scheduled Maintenance
6-15
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
Maintenance Monitor
▼ Maintenance Monitor (Type A audio)
Based on the engine operating conditions, the onboard computer in your vehicle calculates
the remaining oil life in the United States and Puerto Rico. The wrench indicator light in the
instrument cluster will be illuminated when remaining oil life becomes less than 1,000 km
(600 mile), or remaining days are less than 15 (whichever comes first).
The system must be reset whenever replacing the engine oil.
Reset method
Press and hold the dashboard illumination knob with the ignition switched off, then switch it
on. Keep pressing the dashboard illumination knob for more than 5 seconds. The master
warning light will flash for a few seconds when the reset is completed.
Dashboard illumination knob
▼ Maintenance Monitor (Type B audio)
1. Select the icon on the home screen to display the “Applications” screen.
2. Select “Vehicle Status Monitor”.
3. Select “Maintenance” to display the maintenance list screen.
4. Switch the tab and select the setting item you want to change.
You can customize settings in the setup display as follows:
Tab
Item
Explanation
Scheduled
Setting
Notification can be switched on/off.
Time (months)
Displays the time or distance until maintenance is due.
Select this item to set the maintenance period.
The wrench indication/indicator light in the instrument cluster
will be illuminated when the remaining distance is less than 1,000
km or 600 mile, or the remaining number of days is less than 15
(whichever comes first).
Distance (km or mile)
Reset
Resets the time and distance to the initial values.
Once the system turns on, it needs to be reset whenever carrying
out maintenance.
Maintenance and Care
Scheduled Maintenance
6-16
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
Tab
Item
Explanation
Tire Rotation
Setting
Notification can be switched on/off.
Distance (km or mile)
Displays the distance until tire rotation is due.
Select this item to set the tire rotation distance.
The wrench indication/indicator light in the instrument cluster
will be illuminated when the remaining distance is less than 1,000
km or 600 mile.
Reset
Resets the remaining distance to the initial value.
Once the system turns on, it needs to be reset whenever rotating
the tires.
Oil Change
Setting Interval
Oil replacement period can be selected from the flexible setting
or fixed setting, or it can be set to non-display.
The flexible setting is available only in the United States and Pu-
erto Rico. Once engine oil flexible maintenance is selected, the
vehicle calculates the remaining oil life based on the engine oper-
ating conditions. The vehicle lets you know when an oil change is
due by illuminating the wrench indicator light in the instrument
cluster.
Distance (km or mile)
(Displays only in fixed set-
ting)
Displays the distance until the oil replacement is due.
Select this item to set the oil replacement distance.
The wrench indication/indicator light in the instrument cluster
will be illuminated when the remaining distance is less than 1,000
km or 600 mile.
Oil life (km or mile)
(Displays only in flexible
setting)
Displays the engine oil life until the oil replacement is due.
The wrench indication/indicator light in the instrument cluster
will be illuminated when the remaining oil life distance is less
than 1,000 km or 600 mile.
Reset
In flexible setting
Resets the remaining distance until oil replacement is due to the
initial value.
In fixed setting
Resets the remaining distance until oil replacement is due to the
initial value.
Maintenance and Care
Scheduled Maintenance
6-17
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
Owner Maintenance Precautions
The owner or a qualified service technician should make these vehicle inspections at the
indicated intervals to ensure safe and dependable operation.
Bring any problem to the attention of an Authorized Mazda Dealer or qualified service
technician as soon as possible.
When Refueling
Brake and clutch fluid level (page 6-27)
Engine coolant level (page 6-25)
Engine oil level (page 6-24)
Washer fluid level (page 6-27)
At Least Monthly
Tire inflation pressures (page 6-38)
At Least Twice a Year (For Example, Every Spring and Fall)
You can do the following scheduled maintenance items if you have some mechanical ability
and a few basic tools and if you closely follow the directions in this manual.
Engine coolant (page 6-25)
Improper or incomplete service may result in problems. This section gives instructions only
for items that are easy to perform.
As explained in the Introduction (page 6-2), several procedures can be done only by a
qualified service technician with special tools.
Improper owner maintenance during the warranty period may affect warranty coverage.
Refer to Introduction (page 6-2) for owner's responsibility in protecting your investment.
For details, read the separate Mazda Warranty statement provided with the vehicle. If you
are unsure about any servicing or maintenance procedure, have it done by an Authorized
Mazda Dealer.
There are strict environmental laws regarding the disposal of waste oil and fluids. Please
dispose of your waste properly and with due regard to the environment.
We recommend that you entrust the oil and fluid changes of your vehicle to an Authorized
Mazda Dealer.
Maintenance and Care
Owner Maintenance
6-18
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
WARNING
Do not perform maintenance work if you lack sufficient knowledge and experience or the
proper tools and equipment to do the work. Have maintenance work done by a qualified
technician:
Performing maintenance work on a vehicle is dangerous if not done properly. You can be
seriously injured while performing some maintenance procedures.
If you must run the engine while working under the hood, make certain that you remove all
jewelry (especially rings, bracelets, watches, and necklaces) and all neckties, scarves, and
similar loose clothing before getting near the engine or cooling fan which may turn on
unexpectedly:
Working under the hood with the engine running is dangerous. It becomes even more
dangerous when you wear jewelry or loose clothing.
Either can become entangled in moving parts and result in injury.
Pull over to a safe location, then switch the ignition off and make sure the fan is not
running before attempting to work near the cooling fan:
Working near the cooling fan when it is running is dangerous. The fan could continue running
indefinitely even if the engine has stopped and the engine compartment temperature is high.
You could be hit by the fan and seriously injured.
Do not leave items in the engine compartment:
After you have finished checking or doing servicing in the engine compartment, do not forget
and leave items such as tools or rags in the engine compartment.
Tools or other items left in the engine compartment could cause engine damage or a fire
leading to an unexpected accident.
Maintenance and Care
Owner Maintenance
6-19
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
Hood
WARNING
Always check that the hood is closed and
securely locked:
A hood that is not closed and securely
locked is dangerous as it could fly open
while the vehicle is moving and block the
driver's vision which could result in a
serious accident.
▼ Opening the Hood
1. With the vehicle parked, pull the
release handle to unlock the hood.
Release handle
2. Insert your hand into the hood
opening, slide the latch lever to the
right, and lift up the hood.
Lever
NOTE
The lever is located a little to the left of
center when facing the vehicle.
3. Grasp the support rod in the padded
area and secure it in the support rod
hole indicated by the arrow to hold the
hood open.
Pad
Clip
Clip
Support rod
Maintenance and Care
Owner Maintenance
6-20
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
▼ Closing the Hood
1. Check under the hood area to make
certain all filler caps are in place and
all loose items (e.g. tools, oil
containers, etc.) have been removed.
2. Lift the hood, grasp the padded area on
the support rod, and secure the support
rod in the clip. Verify that the support
rod is secured in the clip before closing
the hood.
Clip
Clip
Clip
3. Lower the hood slowly to a height of
about 20 cm (7.9 in) above its closed
position and then let it drop.
CAUTION
When closing the hood, do not push it
excessively such as by applying your
weight. Otherwise, the hood could be
deformed.
Maintenance and Care
Owner Maintenance
6-21
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
Engine Compartment Overview
Windshield washer fluid reservoir
Brake/Clutch fluid reservoir
Engine oil dipstick
Battery
Fuse block
Cooling system cap
Engine coolant reservoir
Engine oil-filler cap
Maintenance and Care
Owner Maintenance
6-22
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст