Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Service manual — part 1637
8D–39
WIRING SYSTEM
Power Seat
D08R200094
METER AND GAUGE
8E–1
RODEO
BODY AND ACCESSORIES
CONTENTS
METER AND GAUGE
Service Precaution. . . . . . . . . . . . . . . . . . . . .
8E–1
General Description . . . . . . . . . . . . . . . . . .
8E–1
Meter Assembly . . . . . . . . . . . . . . . . . . . . . . .
8E–2
General Description . . . . . . . . . . . . . . . . . .
8E–2
Layout for Meters/Gauges, Warning Lights,
Indicator Lights and Illumination Lights. . . .
8E–2
Table for Meter/Gauge Connector Terminal
Connections . . . . . . . . . . . . . . . . . . . . . . . .
8E–4
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
8E–6
Installation . . . . . . . . . . . . . . . . . . . . . . . . .
8E–6
Warning Light Bulb and Indicator Light Bulb .
8E–6
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
8E–6
Installation. . . . . . . . . . . . . . . . . . . . . . . . . .
8E–6
A/T Shift Indicator Light Bulb . . . . . . . . . . . . .
8E–7
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
8E–7
Installation. . . . . . . . . . . . . . . . . . . . . . . . . .
8E–8
Vehicle Speed Sensor . . . . . . . . . . . . . . . . . .
8E–8
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
8E–8
Installation. . . . . . . . . . . . . . . . . . . . . . . . . .
8E–8
Fuel Tank Unit . . . . . . . . . . . . . . . . . . . . . . . .
8E–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8E–9
Main Data and Specifications . . . . . . . . . . . .
8E–10
Service Precaution
WARNING: THIS VEHICLE HAS A
SUPPLEMENTAL RESTRAINT SYSTEM (SRS).
REFER TO THE SRS COMPONENT AND WIRING
LOCATION VIEW IN ORDER TO DETERMINE
WHETHER YOU ARE PERFORMING SERVICE ON
OR NEAR THE SRS COMPONENTS OR THE SRS
WIRING. WHEN YOU ARE PERFORMING SERVICE
ON OR NEAR THE SRS COMPONENTS OR THE
SRS WIRING, REFER TO THE SRS SERVICE
INFORMATION. FAILURE TO FOLLOW WARNINGS
COULD RESULT IN POSSIBLE AIR BAG
DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.
CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call
out the fasteners that require thread lockers or
thread sealant. UNLESS OTHERWISE SPECIFIED,
do not use supplemental coatings (Paints, greases,
or other corrosion inhibitors) on threaded fasteners
or fastener joint interfaces. Generally, such
coatings adversely affect the fastener torque and
the joint clamping force, and may damage the
fastener. When you install fasteners, use the correct
tightening sequence and specifications.
Following these instructions can help you avoid
damage to parts and systems.
General Description
The circuit consists of the starter switch, meter
assembly, Vehicle speed sensor, transmission switch,
lighting switch, turn signal switch, thermo unit, oil
pressure unit, Powertrain Control Module (PCM), fuel
tank unit, 4WD switch, oil pressure switch, parking
brake switch, brake fluid switch, seat belt switch,
illumination controller, multi meter and ambient sensor.
8E–2
METER AND GAUGE
Meter Assembly
General Description
The meter assembly has the speedometer, tachometer,
engine coolant temperature gauge, fuel gauge and
warning/indicator lights. In addition, the meter assembly.
Layout for Meters/Gauges, Warning
Lights, Indicator Lights and
Illumination Lights
Front View
821RY00052
EndOFCallout
Legend
(1)
Engine Coolant Temperature Gauge
(2)
Tachometer
(3)
Warning Light Lens
(4)
Speedometer
(5)
Fuel Gauge
(6)
Reset Button
(7)
Warning Light Lens
(8)
A/T Shift Indicator
METER AND GAUGE
8E–3
Rear View
821RY00054
EndOFCallout
Legend
(1)
Illumination Light Bulb
(2)
Illumination Light Bulb
(3)
Illumination Light Bulb
(4)
Illumination Light Bulb
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст