Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Service manual — part 81
DIFFERENTIAL (FRONT)
4A1–8
Differential Assembly
Disassembled View
415R200002
Legend
(1) Differential Assembly
(2) Flange Nut
(3) Flange
(4) Oil Seal
(5) Outer Bearing
(6) Outer Bearing Outer Race
(7) Differential Carrier
(8) Bearing Cap
(9) Bolt
(10) Collapsible Spacer
(11) Inner Bearing Outer Race
(12) Inner Bearing
(13) Adjust Shim
(14) Pinion Gear
(15) Diff Cage Assembly
(16) Side Bearing Outer Race
(17) Side Bearing
(18) Adjust Shim
(19) Bolt
(20) Axle Case
(21) Final Drive Damper
(22) Damper Bolt
(23) Damper Bracket
4A1–9
DIFFERENTIAL (FRONT)
Disassembly
1. Remove differential carrier fixing bolt.
2. Remove differential assembly.
3. Using holding fixture J–37264 and holding fixture
base J–3289–20, fix the differential assembly to the
bench.
425RS008
4. Remove bearing cap bolt.
5. Apply a setting mark to the side bearing cap and the
differential carrier then remove bearing cap.
425RS009
6. Remove differential cage assembly.
7. Remove side bearing outer race, after removal, keep
the right and left hand side bearing assemblies
separate to maintain inner and outer race
combinations.
8. Remove side bearing, using remover J–42379 and
adapter J–8107–2.
D
Select insert; 303173 and collet halves; 44801 in
remover kit J–42379.
415RW003
9. Remove adjust shim, note the thickness and position
of the shims removed.
10. Remove the flange nut using holding wrench
J–8614–01.
415RS018
DIFFERENTIAL (FRONT)
4A1–10
11. Remove flange using a universal puller.
12. Remove the drive pinion assembly using a soft metal
rod and a hammer.
425RS012
13. Remove collapsible spacer.
14. Remove the inner bearing using remover J–42379.
D
Select insert; 303173 and collet halves; 44801 in
remover kit J–42379.
415RW004
15. Remove adjust shim.
16. Remove oil seal.
17. Remove outer bearing.
18. Remove the inner bearing outer race (1) and the outer
bearing outer race (2) by using a brass bar and a
hammer.
425RS014
425RS015
4A1–11
DIFFERENTIAL (FRONT)
19. Remove damper and bracket.
425RW042
Reassembly
1. Using installer J–7817 and grip J–8092, install outer
bearing outer race.
415RW013
2. Using installer J–7818 and grip J–8092, install Inner
bearing outer race.
415RW014
3. Install adjust shim and adjust drive pinion mounting
distance:
1. Apply gear oil to the inner and outer drive pinion
bearing.
Clean the pinion setting gauge set.
Then install the gauge set together with the inner
and outer bearings.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст