Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Service manual — part 1014
8F–106 BODY STRUCTURE
E10RS010
8F–107
BODY STRUCTURE
Special Tools
ILLUSTRATION
TOOL NO.
TOOL NAME
J–34355
Spare Tire Carrier Nut
Wrench
SEATS
8G–1
TROOPER
BODY AND ACCESSORIES
SEATS
CONTENTS
Service Precaution
8G–1
. . . . . . . . . . . . . . . . . . . . . .
Front Seat Assembly
8G–2
. . . . . . . . . . . . . . . . . . . .
Front Seat Assembly and Associated Parts
8G–2
Removal
8G–2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8G–2
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembled View
8G–3
. . . . . . . . . . . . . . . . . . . .
Disassembly
8G–4
. . . . . . . . . . . . . . . . . . . . . . . . . .
Reassembly
8G–5
. . . . . . . . . . . . . . . . . . . . . . . . . .
Power Seat Assembly
8G–6
. . . . . . . . . . . . . . . . . . .
General Description
8G–6
. . . . . . . . . . . . . . . . . . . . .
Disassembled View
8G–6
. . . . . . . . . . . . . . . . . . . .
Disassembly
8G–7
. . . . . . . . . . . . . . . . . . . . . . . . . .
Reassembly
8G–9
. . . . . . . . . . . . . . . . . . . . . . . . . .
Power Seat Switch
8G–9
. . . . . . . . . . . . . . . . . . . . . .
Removal
8G–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8G–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Tilt Motor / Rear Tilt Motor / Slide Motor
/ Recliner Motor
8G–10
. . . . . . . . . . . . . . . . . . . . . . . .
Parts Location
8G–10
. . . . . . . . . . . . . . . . . . . . . . . .
Removal and Installation
8G–10
. . . . . . . . . . . . . . .
Seat Heater System
8G–11
. . . . . . . . . . . . . . . . . . . . .
General Description
8G–11
. . . . . . . . . . . . . . . . . . . . .
Seat Heater Switch Removal and
Installation
8G–11
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Heat Unit Parts Location
8G–11
. . . . . . . . . . . . . . . .
Heat Unit Removal and Installation
8G–11
. . . . . .
Rear Seat Assembly
8G–12
. . . . . . . . . . . . . . . . . . . . .
Rear Seat Assembly and Associated Parts
8G–12
Removal
8G–12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8G–12
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembled View (Split Type)
8G–13
. . . . . . . . .
Disassembly (Split Type)
8G–14
. . . . . . . . . . . . . . .
Reassembly (Split Type)
8G–15
. . . . . . . . . . . . . . . .
Disassembled View (Bench Type)
8G–16
. . . . . . .
Disassembly (Bench Type)
8G–17
. . . . . . . . . . . . .
Reassembly (Bench Type)
8G–18
. . . . . . . . . . . . . .
Main Data and Specifications
8G–18
. . . . . . . . . . . . .
Service Precaution
WARNING: THIS VEHICLE HAS A SUPPLEMENTAL
RESTRAINT SYSTEM (SRS). REFER TO THE SRS
COMPONENT AND WIRING LOCATION VIEW IN
ORDER TO DETERMINE WHETHER YOU ARE
PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING. WHEN YOU
ARE PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING, REFER TO
THE SRS SERVICE INFORMATION. FAILURE TO
FOLLOW WARNINGS COULD RESULT IN POSSIBLE
AIR BAG DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.
CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or other
corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fastener. When
you install fasteners, use the correct tightening
sequence and specifications. Following these
instructions can help you avoid damage to parts and
systems.
8G–2
SEATS
Front Seat Assembly
Front Seat Assembly and Associated Parts
750R200027
Legend
(1) Rear Cover
(2) Front Seat Assembly
(3) Seat Belt Warning Connector
(4) Door Sill Plate
(5) Riser Cover
(6) Front Cover
Removal
1. Disconnect the battery ground cable.
2. Remove the front cover.
3. Remove the rear cover.
D
Remove the cover fixing screw from the rear inner
cover, if this model is equipped with the power
seats.
4. Remove the door sill plate.
5. Remove the rear seat foot rest.
D
Refer to the Rear Seat Foot Rest in this section.
6. Remove the riser cover.
7. Remove the seat belt warning connector (Driver’s
side only).
8. Remove the front seat assembly.
D
Disconnect the power seat connector, if this model
is equipped with the power seats.
Installation
To install, follow the removal steps in the reverse order,
noting the following points:
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст