Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Service manual — part 1375
6B–12
ENGINE COOLING (6VD1 3.2L)
Main Data and Specifications
General Specifications
M/T
A/T
Cooling system
Engine coolant forced circulation
Radiator
Tube type corrugated (2 tube in row)
Heat radiation capacity
70,000 kcal/h
77,800 kcal/h
Heat radiation area
9.74m
@
(104.8ft
@
)
11.74m
@
(126.4ft
@
)
Radiator front area
0.263m
@
(2.83ft
@
)
Radiator dry weight
42N (9.4lb)
45N (10.1lb)
Radiator cap valve opening pressure
93.3
∼
122.7kpa (13.5
∼
17.8psi)
Engine coolant capacity
2.5lit (0.6 US gal)
2.4lit (0.6 US gal)
Engine coolant pump
Centrifugal impeller type
Delivery
300 (317) or more
Pump speed
5000
±
50 rpm
Thermostat
Wax pellet type with air hole
Valve opening temperature
74.5
∼
78.5
°
C (166.1
∼
173.3
°
F)
Engine coolant total capacity
11.1lit (2.93 US gal)
10.0lit (2.64 US gal)
Torque Specifications
E06RW004
ENGINE COOLING (6VD1 3.2L)
6B–13
Special Tool
ILLUSTRATION
TOOL NO.
TOOL NAME
J–24460–01
Tester; radiator cap
J–33984–A
Adapter; radiator cap
ENGINE FUEL (6VD1 3.2L)
6C–1
RODEO
ENGINE
CONTENTS
ENGINE FUEL FOR LONG WHEEL BASE
Service Precaution. . . . . . . . . . . . . . . . . . . . .
6C–1
General Description . . . . . . . . . . . . . . . . . .
6C–2
Fuel Metering . . . . . . . . . . . . . . . . . . . . . . .
6C–3
Fuel Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . .
6C–4
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
6C–4
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . .
6C–4
Installation . . . . . . . . . . . . . . . . . . . . . . . . .
6C–5
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . .
6C–5
In–Tank Fuel Filter . . . . . . . . . . . . . . . . . . .
6C–5
Fuel Pump Flow Test . . . . . . . . . . . . . . . . .
6C–5
Fuel Pump . . . . . . . . . . . . . . . . . . . . . . . . . . .
6C–6
Fuel Pump and Associated Parts . . . . . . . .
6C–6
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
6C–6
Installation . . . . . . . . . . . . . . . . . . . . . . . . .
6C–7
Fuel Tube / Quick – Connector Fittings . . . . .
6C–7
Precautions. . . . . . . . . . . . . . . . . . . . . . . . .
6C–7
Cautions During Work . . . . . . . . . . . . . . . .
6C–7
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
6C–7
Reuse of Quick–Connector. . . . . . . . . . . . .
6C–8
Assembling Advice . . . . . . . . . . . . . . . . . . .
6C–8
Fuel Pump Relay . . . . . . . . . . . . . . . . . . . . . .
6C–9
General Description . . . . . . . . . . . . . . . . . .
6C–9
Fuel Tank. . . . . . . . . . . . . . . . . . . . . . . . . . . .
6C–9
Fuel Tank and Associated Parts . . . . . . . . .
6C–9
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
6C–9
Installation. . . . . . . . . . . . . . . . . . . . . . . . . .
6C–10
Fuel Gauge Unit. . . . . . . . . . . . . . . . . . . . . . .
6C–10
Removal and Installation . . . . . . . . . . . . . .
6C–10
Fuel Filler Cap . . . . . . . . . . . . . . . . . . . . . . . .
6C–10
General Description . . . . . . . . . . . . . . . . . .
6C–10
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . .
6C–10
Main Data and Specifications . . . . . . . . . . . .
6C–11
Special Tool . . . . . . . . . . . . . . . . . . . . . . . .
6C–11
Service Precaution
WARNING: THIS VEHICLE HAS A SUPPLEMENTAL
RESTRAINT SYSTEM (SRS). REFER TO THE SRS
COMPONENT AND WIRING LOCATION VIEW IN
ORDER TO DETERMINE WHETHER YOU ARE
PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING. WHEN YOU
ARE PERFORMING SERVICE ON OR NEAR THE
SRS COMPONENTS OR THE SRS WIRING, REFER
TO THE SRS SERVICE INFORMATION. FAILURE TO
FOLLOW WARNINGS COULD RESULT IN
POSSIBLE AIR BAG DEPLOYMENT, PERSONAL
INJURY, OR OTHERWISE UNNEEDED SRS SYSTEM
REPAIRS.
CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or
other corrosion inhibitors) on threaded fasteners
or fastener joint interfaces. Generally, such
coatings adversely affect the fastener torque and
the joint clamping force, and may damage the
fastener. When you install fasteners, use the
correct tightening sequence and specifications.
Following these instructions can help you avoid
damage to parts and systems.
6C–2
ENGINE FUEL (6VD1 3.2L)
General Description
140R100026
EndOFCallout
Legend
(1) Fuel Filler Cap
(2) Fuel Tank
(3) Rollover Valve
(4) Fuel Pump and Sender Assembly
(5) Fuel Filter
(6) Fuel Rail Right
(7) Right Bank
(8) Fuel Rail Left
(9) Left Bank
(10) Fuel Pressure Control Valve
(11) Common Chamber
(12) Duty Solenoid Valve
(13) Throttle Valve
(14) Canister
(15) Vent Hose
(16) Vent Solenoid Cut Valve
(17) Separator
(18) Shut off Valve (With Over Pressure Relief
Valve)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст