Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Service manual — part 1007
8F–78
BODY STRUCTURE
Tailgate Outer Weatherstrip
Parts Location
682RW001
Legend
(1) Tailgate Outer Weatherstrip
Removal
1. Disconnect the battery ground cable.
2. Remove tailgate outer weatherstrip (1).
D
Pry the tailgate outer weatherstrip clips (2) free from
the body panel.
682RS002
Installation
To install, follow the removal steps in the reverse order,
noting the following point.
1. Insert the tailgate outer weatherstrip clip into the body
panel hole securely in order to install the tailgate outer
weatherstrip with the gap between the body panel
and the weatherstrip.
8F–79
BODY STRUCTURE
Tailgate Center Weatherstrip
Parts Location
682R200004
Legend
(1) Clip
(2) Tailgate Center Weatherstrip
Removal
1. Remove tailgate center weatherstrip.
D
Remove the fixing clips in order to pull the tailgate
center weatherstrip out from the tailgate panel.
Installation
1. Tailgate center weatherstrip (1).
D
Start assembling at the A portion.
682R200005
D
Clean the tailgate center weatherstrip (4) adhesive
tape (2) and the butyl seal (3) fitting position of the
tailgate panel.
D
Affix new adhesive tape and the butyl seal to the
weatherstrip (lower side) in order to install the
tailgate center weatherstrip to the tailgate panel
with no gap between them.
682RS004
8F–80
BODY STRUCTURE
Tailgate Main Weatherstrip
Parts Location
682RS005
Legend
(1) Tailgate Main Weatherstrip
Removal
1. Remove tailgate main weatherstrip.
D
Pull the tailgate main weatherstrip out from the
body panel.
Installation
1. Tailgate main weatherstrip.
D
Align the A and B positions to the corners of the
body panel. Install the tailgate main weatherstrip to
the body panel by gently tapping with a plastic
hammer. There should be not clearance between
the body panel the tailgate main weatherstrip.
8F–81
BODY STRUCTURE
Spare Tire Carrier
Parts Location
530RS001
Legend
(1) Spare Tire
(2) Spare Tire Carrier
Removal
1. Remove spare tire.
2. Remove spare tire carrier by using spare tire carrier
nut wrench J–34355.
530RS002
Installation
1. Install the spare tire carrier.
D
Tighten the carrier fixing bolts to the specified
torque.
Torque : 31 N
•
m (23 lb ft)
2. Install the spare tire.
D
Tighten the spare tire fixing bolts to the specified
torque.
Torque : 118 N
•
m (87 lb ft)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст