Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Service manual — part 448
LIGHTING SYSTEM
8A–13
Luggage Room Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the lens (2).
3. Remove the bulb (1).
D
Pull out the bulb.
805R200001
Installation
To install, follow the removal steps in the reverse order.
Shift Lever Illumination Light Bulb (A/T)
Removal
1. Disconnect the battery ground cable.
2. Remove the console assembly.
D
Refer to
Consol in Body Structure section.
3. Remove the indicator cover (1).
4. Remove the bulb (2).
D
Turn the bulb socket counterclockwise.
D
Pull out the bulb from the socket.
825R200022
Installation
To install, follow the removal steps in the reverse order.
8A–14
LIGHTING SYSTEM
Vanity Mirror Illumination Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the lens (1).
3. Remove the bulb (2).
805R200004
Installation
To install, follow the removal steps in the reverse order.
Switch Unit Assembly Illumination Light Bulb
(Power/Winter & Intelligent Suspension Switch)
Removal
1. Disconnect the battery ground cable.
2. Remove the center cluster assembly.
D
Refer to
Instrument Panel Assembly in Body
Structure section.
3. Remove the audio.
D
Refer to
Audio in Entertainment section.
4. Remove the illumination light bulb.
825R200036
Installation
To install, follow the removal steps in the reverse order.
LIGHTING SYSTEM
8A–15
TOD Switch Illumination Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the meter cluster (1).
D
Refer to
Instrument Panel Assembly in Body
Structure section.
3. Remove the bulb (3).
D
Disconnect the TOD switch connector and cruise
control main switch connector.
D
Remove the TOD switch (2).
825R200033
Installation
To install, follow the removal steps in the reverse order.
Cruise Control Main Switch Illumination Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the meter cluster panel (4).
D
Refer to
Instrument Panel Assembly in Body
Structure section.
3. Remove the bulb (1).
D
Disconnect the TOD switch connector and cruise
control main switch connector.
D
Remove the TOD switch (3).
D
Remove the cruise main switch (2).
825R200032
Installation
To install, follow the removal steps in the reverse order.
8A–16
LIGHTING SYSTEM
Rear Wiper and Washer Switch Illumination Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the lower cover assembly (3).
D
Remove the dash side trim cover.
3. Remove the bulb (1).
D
Disconnect the connector.
D
Remove the rear wiper and washer switch (2).
825R200037
Installation
To install, follow the removal steps in the reverse order.
Seat Heater Switch Illumination Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the center consol assembly (3).
D
Refer to
Consol in Body Structure section.
3. Remove the bulb (2).
D
Disconnect the seat heater switch connector.
D
Remove the seat heater switch (1).
825R200034
Installation
To install, follow the removal steps in the reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст