Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Service manual — part 453
WIPER/WASHER SYSTEM
8B–11
Alarm and Relay Control Unit
Removal
1. Disconnect the battery ground cable.
2. Remove the grove box (1).
3. Remove the alarm and relay control unit (2).
Disconnect the connector.
826R200020
Installation
To install, follow the removal steps in the reverse order.
Rear Wiper Arm/Blade
Removal
1. Open the cap (2).
2. Remove the arm nut (3).
3. Remove the wiper arm/blade (1).
885R200011
Installation
Refer to
Rear Wiper Motor in this section.
8B–12 WIPER/WASHER SYSTEM
Rear Washer Nozzle
Removal
1. Disconnect the battery ground cable.
2. Remove the high mounted stoplight (1).
D
Refer to
High Mounted Stoplight in Lighting System
section.
3. Remove the washer nozzle(3).
D
Pull out the washer nozzle from the washer hose
(2).
885R200003
Installation
To install, follow the removal steps in the reverse order.
Rear Washer Spray Pattern
885R200006
Legend
(1) Washer Nozzle
(2) Spray Target
(3) High Mounted Stoplight
WIPER/WASHER SYSTEM
8B–13
Rear Wiper Blade Rubber
Removal
1. Remove the wiper blade from the wiper arm.
2. Press and hold the wiper rubber under the wiper blade
hook (1).
3. Pull the wiper rubber out from wiper blade.
CAUTION: When the wiper blade has been
removed, wrap the tip of the wiper arm with cloth, to
avoid damaging the glass.
885R200004
Installation
1. Install the wiper blade rubber.
D
Matching the grove of the wiper rubber (3) and the
guide (2) of the wiper blade (1), insert the wiper
rubber to the wiper blade.
885R200009
D
Check that the wiper rubber is set between the right
hook and left hook of the wiper blade.
885R200008
8B–14 WIPER/WASHER SYSTEM
Main Data and Specifications
Torque Specifications
Application
N·m
Lb Ft
Lb In
Windshield Wiper Motor Shaft Nut
14
—
122
Windshield Wiper Arm Nuts
23
17
—
Rear Wiper Motor Shaft Nut
10
—
87
Rear Wiper Arm Nut
9
—
78
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст