Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Service manual — part 1021
8H–8
SECURITY AND LOCKS
4. Disconnect the locking links (arrow marks positions)
and remove the fixing screws to remove the door lock
assembly.
652RS002
Legend
(1) Outside Handle
(2) To Inside Lock Knob
(3) To Inside Handle
(4) To Actuator
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Apply chassis grease to the lock assembly and striker
moving surface.
2. Tighten the door lock assembly fixing screws to the
specified torque.
Torque: 7 N·m (61 lb in)
3. Check that the door lock operates smoothly.
SECURITY AND LOCKS
8H–9
Rear Outside Handle
Rear Outside Handle and Associated Parts
652R200003
Legend
(1) Door Trim Panel
(2) Waterproof Sheet
(3) Outside Handle
Removal
1. Disconnect the battery ground cable.
2. Remove the door trim panel.
3. Remove the waterproof sheet.
D
Refer to the Rear Window Regulator And Glass in
Body Structure section.
4. Disconnect the locking link (arrow mark position) and
remove three fixing bolts to remove the outside
handle.
652RS003
8H–10 SECURITY AND LOCKS
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Tighten the outside handle fixing bolts to the specified
torque.
Torque: 9 N·m (78 lb in)
2. Check that the outside handle operates smoothly.
Rear Door Inside Lock Knob Link
Removal
1. Disconnect the battery ground cable.
2. Remove the door trim panel(3).
3. Remove the waterproof sheet(2).
D
Refer to the Rear Window Regulator And Glass in
Body Structure section.
4. Remove the fixing screw(4) and disconnect the
locking link at the door lock assembly to remove the
rear door inside lock knob link(1).
635R200013
Installation
To install, follow the removal steps in the reverse order.
SECURITY AND LOCKS
8H–11
Door Inside Lock Knob
Removal
1. Disconnect the battery ground cable.
2. Remove the door trim panel(1).
D
Refer to the Front / Rear Door Trim Panel in
Exterior/Interior Trim section.
3. Turn the door inside lock knob counterclockwise and
then remove the door inside lock knob (2).
632RS011
Installation
To install, follow the removal steps in the reverse order.
Door Inside Handle
Removal and Installation
D
Refer to the Front/Rear Door Trim Panel in
Exterior/Interior Trim section.
635RS008
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст