Isuzu N-Series. Service manual — part 512
Engine Mechanical (4HK1-TC) 6A-153
Oil Filter Assembly
Components
Legend
1. Oil Pressure Switch
2. Oil Filter Body
3. O-ring
Removal
1. Place a tray under the oil filter cartridge.
2. Remove the oil filter cartridge.
3. Remove the oil pressure switch.
4. Remove the oil filter body.
5. Remove the O-ring.
N6A6294E
6A-154 Engine Mechanical (4HK1-TC)
Installation
1. Install the O-rings and on the oil filter body.
Legend
1. O-ring
2. O-ring
2. Install the oil filter on the cylinder block and tighten
it using the specified torque.
Tighten:
Nuts and bolts to 48 N
⋅m (4.9 kg⋅m/35 lb⋅ft)
3. Install the oil pressure switch on the oil filter body.
• Apply the liquid gasket (Loctite 262) on 2 to 3
peaks from the tip of the threaded part of the oil
pressure switch and install it at the position
shown in the figure.
Tighten:
Oil pressure switch to 13 N
⋅m (1.3 kg⋅m/113 lb⋅in)
N6A6295E
N6A6296E
N6A6297E
Engine Mechanical (4HK1-TC) 6A-155
Oil Filter Cartridge
Components
Legend
1. Oil Filter Cartridge
Removal
1. Place a tray under the oil filter cartridge.
2. Remove the oil filter cartridge using the oil filter
wrench.
Special tool
Oil filter wrench: 1-8522-1097-0 (EN-47683)
Installation
1. Install the oil filter cartridge.
• Apply grease or engine oil to the seal in the
cartridge and install it using the oil filter wrench.
• Tighten the cartridge using the specified torque.
Tighten:
Cartridge to 20 N
⋅m (2.0 kg⋅m/14 lb⋅ft)
After it comes in contact with the oil seal, tighten it
through an additional turn of 1 and 1/4.
Special tool
Oil filter wrench: 1-8522-1097-0 (EN-47683)
N6A6298E
N6A6299E
6A-156 Engine Mechanical (4HK1-TC)
Special Tool
Illustration
Tool Number /
Description / Remarks
1-8522-1097-0
(EN-47683)
Oil Filter Wrench
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст