Isuzu N-Series. Service manual — part 87
2-54 CAB AND FRAME
Center and Passenger Side
Removal
1. Seat cushion assembly
• Raise the cushion and remove the clips and
peel off the magic fasteners at 5 positions and
pull out the seat belt from the band.
2. Center seat back assembly (Wide cab model)
• Remove the 2 hinge fixing bolts.
• Remove the 2 fixing bolts and remove the hinge
assembly.
• Remove the fixing screw and remove the seat
back tray.
3. Passenger seat back assembly
• Remove the 2 hinge fixing bolts.
• Remove the 2 fixing bolts and remove the hinge
assembly.
4. Hinge bracket
• Remove 2 fixing bolts.
Legend
1. Center seat back assembly (if equipped)
6. Passenger seat back assembly
2. Seat back tray
7. Hinge bracket
3. Seat back
8. Seat belt band
4. Hinge assembly
9. Seat cushion assembly
5. Magic fastener
10. Clip positions (five)
N2A0092E
CAB AND FRAME 2-55
Installation
For installation, reverse the removal procedure taking
the following point into consideration.
1. Tighten each hinge of the seat back with the spec-
ified bolts (with Loctite) securely.
Tighten:
18 N
⋅m (1.8 kg⋅m/13.3 lb⋅ft)
2. Check the direction of seat cushion fixing clip and
set its mate clip on the engine cover.
3. Pass the seat belt through the seat cushion band
(2).
4. Install the seat cushion (1) in the following order:
a
→ b → c → d → e
Fixing Torque
N2A0093E
N2A0094E
2-56 CAB AND FRAME
Rear Seat (NKR)
Removal
1. Pull the seat cushion at the three clip positions
from the seat frame and remove the rear seat
cushion.
2. Remove the 4 bolts and remove the rear seat
frame.
Installation
To install, follow removal steps in the reverse order, not-
ing the following point.
1. Tighten the rear seat frame mounting bolts to the
specified torque.
Tighten:
Rear seat frame bolts to 13 N
⋅m (1.3 kg⋅m/9.6 lb⋅ft)
Legend
1. Rear Seat Cushion
3. Rear Seat Frame
2. Clip
2
3
1
N2A0227E
CAB AND FRAME 2-57
Rear Seat (NPR, NQR)
Removal
1. Pull the seat cushion at the three clip positions
from the seat frame and remove the rear seat
cushion.
2. Remove the 6 bolts and remove the rear seat
frame.
Installation
To install, follow removal steps in the reverse order, not-
ing the following point.
1. Tighten the rear seat frame mounting bolts to the
specified torque.
Tighten:
Rear seat frame bolts to 13 N
⋅m (1.3 kg⋅m/9.6 lb⋅ft)
Legend
1. Rear Seat Cushion
3. Rear Seat Frame
2. Clip
N2A0095E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст