Isuzu N-Series. Service manual — part 51
SERVICE INFORMATION 00-35
Refrigerant Line Fixing Torque (4HK1-TC Engine Model For Australia)
25 (2.5 / 18)
6 (0.6 / 4)
N.m (kg.m / lb.ft)
6 (0.6 / 4)
15 (1.5 / 11)
15 (1.5 / 11)
15 (1.5 / 11)
N1A0196E
00-36 SERVICE INFORMATION
Drive Plate / Field Coil Fixing Torque
15 (1.5/11)
5 (0.5/44)
N1A0015E
SERVICE INFORMATION 00-37
SPECIAL TOOLS
Illustration
Tool Number /
Description / Remarks
5-8840-0629-0 (J-39500-
A) / ACR
4
(115V 60Hz)
5-8840-0630-0 (J-39500-
220A) / ACR
4
(220-240V
50/60Hz)
5-8840-0631-0 (J-39500-
220ANZ) / ACR
4
(220-
240V 50/60Hz Australian
model)
ACR
4
: R-134a Refriger-
ant Recovery/ Recycling
/ Recharging / System
5-8840-0117-0 (J-33939)
/ Drive plate holder
5-8840-0122-0 (J-33944-
A) / Drive plate puller
5-8840-0621-0 (J-33944)
/ Forcing screw
5-8840-0121-0 (J-33943)
/ Pulley puller pilot
5-8840-0111-0 (J-8433) /
Pulley puller
5884006290
5884001170
5884001220
5884006210
5884001210
5884001110
5-8840-0120-0 (J-33942)
/ Shaft seal remover and
installer
5-8840-0368-0 (J-34614)
/ Shaft seal guide
5-8840-0118-0 (J-33940)
/ Pulley installer
5-8840-0007-0 (J-8092) /
Drive handle
Illustration
Tool Number /
Description / Remarks
5884001200
5884003680
5884001180
5884000070
HEATING AND VENTILATION 1A-1
HEATING AND AIR CONDITIONING
SECTION 1A
HEATING AND VENTILATION
Caution:
When fasteners are removed, always reinstall them at the same location from which they were removed. If a fastener
needs to be replaced, use the correct part number fastener for that application. If the correct part number fastener is
not available, a fastener of equal size and strength (or stronger) may be used.
Fasteners that are not reused, and those requiring thread locking compound, will be called out. The correct torque
values must be used when installing fasteners that require it. If the above conditions are not followed, parts or system
damage could result.
Contents
GENERAL DESCRIPTION . . . . . . . . ... 1A-2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст