Isuzu N-Series. Service manual — part 236
ANTI-LOCK BRAKE SYSTEM (ABS) 5A4-9
Tech 2 Scan Tool
From 98 MY, Isuzu dealer service departments are recommended to use Tech 2. Please refer to Tech 2 scan tool
user guide.
Legend
1. PCMCIA Card
4. DLC Cable
2. RS 232 Loop Back Connector
5. Tech 2
3. SAE 16/19 Adapter
N5A1004E
5A4-10 ANTI-LOCK BRAKE SYSTEM (ABS)
Tech 2 Features
1. Tech 2 is a 12 volt system. Do not apply 24 volt.
2. After connecting and/or installing the Vehicle Com-
munications Interface (VCI) module, PCMCIA card
and DLC connector to the Tech 2, connect the tool
to the vehicle DLC.
3. Make sure the Tech 2 is powered OFF when re-
moving or installing the PCMCIA card.
4. The PCMCIA card has a capacity of 10 Megabytes
which is 10 times greater than the memory of the
Tech 1 Mass Storage Cartridge. (except 2003 year
model)
5. The Tech 2 has the capability of two snapshots.
6. The PCMCIA card is sensitive to magnetism and
static electricity, so care should be taken in the
handling of the card.
7. The Tech 2 can plot a graph when replaying a
snapshot.
8. Always return to the Main Menu by pressing the
EXIT key several times before shutting down.
9. To clear Diagnostic Trouble Codes (DTCs), open
Application Menu and press “F1: Clear DTC Info”.
Getting Started
• Before operating the Isuzu PCMCIA card with the
Tech 2, the following steps must be performed:
1. The Isuzu System PCMCIA card (1) inserts into the
Tech 2 (5).
2. Connect the SAE 16/19 adapter (3) to the DLC ca-
ble (4).
3. Connect the DLC cable to the Tech 2 (5).
4. Make sure the vehicle ignition is off.
5. Connect the Tech 2 SAE 16/19 adapter to the ve-
hicle DLC.
6. Turn on the vehicle ignition.
7. Power the Tech 2 ON and verify the Tech 2 power
up display.
Notice:
The RS232 Loop back connector is only to use for diag-
nosis of Tech 2. Refer to user guide of the Tech 2.
N5A1005E
Tech
Tech
2
Press [ENTER] to continue.
Software Version: X.XXX
N5A1006E
ANTI-LOCK BRAKE SYSTEM (ABS) 5A4-11
Operating Procedure (For Example)
The power up screen is displayed when you power up
the tester with the Isuzu systems PCMCIA card. Follow
the operating procedure below.
Menu
• The following table shows which functions are
used for the available equipment versions.
Tech
Tech
2
Press [ENTER] to continue.
Software Version: X.XXX
Main Menu
F0: Diagnostics
F1: Code Index
F2: View Capture Data
F3: Tool Options
F4: Download / Upload Help
Vehicle Identification
Select one of the following
Model Year(s)
(1) 2001
(Y) 2000
(X) 1999
(W) 1998
(1) 2001
1 / 4
(ENTER)
(F0 ENTER)
(2005 ENTER)
N5A1007E
(N
∗ ENTER)
(F1 ENTER)
(ABS/ASR ENTER)
Vehicle Identification
Select one of the following
Vehicle Type (s)
(UE)
(TF )
(N
∗)
(Off-Road)
(N
∗) ELF, NPR, NQR
Rodeo/Amigo, Wizard/MU
LUV
ELF, NPR, NQR
Industrial Engine
3 / 4
System Selection Menu
( 1 ) 2 0 0 1 ( N
∗) ELF, NPR, NQR
F0:
F1:
F2:
Engine
Chassis
Body
Vehicle Identification
Select one of the following
Chassis
A B S
A B S
1 / 2
N5A1008E
Chassis
(Y) 2000
∗
(N ) ELF, NPR, NQR
Electronic System: ABS
C o n f i r m
Partnumber
Identifier
8972521653
00(2WD)
20(4WD)
40(ABS/ASR)
60(12V vehicle)
Partnumber
N5A1009E
5A4-12 ANTI-LOCK BRAKE SYSTEM (ABS)
DTC Modes
There are two options available in Tech 2 DTC mode to
display the enhanced information available. After select-
ing DTC, the following menu appears.
• DTC Info
• Clear Info
The following is a brief description of each of the sub
menus in DTC Info and DTC. The order in which they
appear here is alphabetical and not necessarily the way
they will appear on the Tech 2.
DTC Information Mode
Use the DTC info mode to search for a specific type of
stored DTC information. There are two choices. The ser-
vice manual may instruct the technician to test for DTCs
in a certain manner. Always follow published service
procedures.
When CODE “13” is Displayed (Vehicle Type Error)
Chassis
F0:
F1:
Diagnostic Trouble Codes
Data Display
F2: Snapshot
F3: Actuator Test
N5A1010E
Diagnostic Trouble Codes
F0:
F1:
Read DTC Info Ordered By Priority
Clear DTC Information
F2: DTC Information
F3: Clear & Reset Vehicle Type
N5A1011E
Step
Action
Value(s)
YES
NO
1
Check harness.
Is it okay?
—
Erase vehicle type
with Tech 2 and
reread harness
information.
Replace the har-
ness.
Diagnostic Trouble Codes
F0:
Read DTC Info
F1:
Clear DTC Info
F2: DTC Info
F3: Clear & Reset Vehicle Type
(F3: ENTER)
N5A1012E
Clear & Reset Vehicle Type
Do you want clear &
Reset Vehicle Type?
YES
NO
N5A1013E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст