Isuzu Trooper (2000 year). Service manual — part 445
8A–20
LIGHTING SYSTEM
Door Switch
Removal
1. Disconnect the battery ground cable.
2. Remove the screw and disconnect the connector to
remove the door switch(1).
825RS043
Installation
To install, follow the removal steps in the reverse order.
Rear Defogger Switch
Removal
1. Disconnect the battery ground cable.
2. Remove the front console assembly(1).
Refer to the Instrument Panel Assembly in Body
Structure section.
3. Remove the lower cluster assembly(2).
Refer to the Instrument Panel Assembly in Body
Structure section.
4. Remove the instrument panel driver lower cover
assembly(3).
Refer to the Instrument Panel Assembly in Body
Structure section.
821RW024
5. Remove the instrument panel cluster assembly(4).
Refer to the Instrument Panel Assembly in Body
Structure section.
6. Disconnect the connector and push the lock from the
back side of the instrument panel cluster assembly to
remove the rear defogger switch(5).
LIGHTING SYSTEM
8A–21
825RW023
Installation
To install, follow the removal steps in the reverse order,
noting the following point.
1. Push in the switch with your fingers until it locks
securely.
Seat Heater Switch
Removal
1. Disconnect the battery ground cable.
2. Remove four fixing screws and disconnect the switch
connectors to remove the front console assembly(4).
3. Push the lock from the back side of the front console
assembly to remove the seat heater switch(5).
825RW025
Installation
To install, follow the removal steps in the reverse order,
noting the following point.
1. Push the switch with your fingers until it locks
securely.
Key Remind Switch (Starter Switch)
Removal and Installation
Refer to the removal and installation on steps of the
Starter Switch in this section.
8A–22
LIGHTING SYSTEM
Illumination Controller
Removal
1. Disconnect the battery ground cable.
2. Remove the front console assembly(1).
Refer to the Instrument Panel Assembly in Body
Structure section.
3. Remove the lower cluster assembly(2).
Refer to the Instrument Panel Assembly in Body
Structure section.
4. Remove the instrument panel driver lower cover
assembly(3).
Refer to the Instrument Panel Assembly in Body
Structure section.
821RW024
5. Remove the instrument panel cluster assembly(4).
Refer to the Instrument Panel Assembly in Body
Structure section.
6. Disconnect the connector and push the lock from the
back side of the instrument panel cluster assembly to
remove the illumination controller(5).
825RW026
Installation
To install, follow the removal steps in the reverse order,
noting the following point.
1. Push in the switch with your fingers until the switch is
locked securely.
LIGHTING SYSTEM
8A–23
Main Data and Specifications
Light and Bulb Specifications
D08RS063
Legend
(1) Dome Light
(2) Luggage Room Light
(3) Courtesy Light
(4) Meter
(5) Side Marker Light
(6) Turn Signal Light/Parking Light
(7) Cornering Light
(8) Headlight
(9) Fog Light
(10) Map Light
(11) High Mount Stoplight
(12) License Plate Light
(13) Turn Signal Light
(14) Backup Light
(15) Taillight/Stoplight
(16) Rear Combination Light
Light Name
Bulb
No.
Rated
Power
Number
of Bulbs
Lens
Color
Remarks
Headlight
9004
65W/45W
2
White
Halogen
Front
Combination
Turn Signal Light/Parking
Light
1157
27W/8W
2
White
Combination
Light
Side Marker Light
194
3.8W
2
Amber
Light
Cornering Light
1156
27W
2
White
Fog Light
—
55W
2
White
Halogen
Rear
Taillight/Stoplight
1157
8W/27W
2
Red
Rear
Combination
Li ht
Turn Signal Light
1156
27W
2
Amber
Light
Backup Light
1156
27W
2
White
High Mount Stoplight
—
—
50
Red
LED
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст