Isuzu Rodeo UE. Service manual — part 561
8D–92
WIRING SYSTEM
License Plate Light Inoperative
Step
Action
Value(s)
Yes
No
1
Is the tail light normal?
—
Go to Step 2
Repair the
taillight (refer
to
diagnosis«bot
h taillights
inoperative”
in this
section)
2
Is the license plate light bulb normal?
—
Go to Step 3
Replace bulb
3
Is B–8 terminal?
—
Go to Step 4
Ground it
securely
4
Is the battery voltage applied between G–8 terminal 2
and the ground?
—
Go to Step 5
Repair a poor
connection at
the
connectors or
an open
circuit in the
circuit.
5
Repair a poor connection at the connectors or an open
circuit between G–8 terminal 1 and B–8 terminal.
Is the action complete?
—
Verify repair
—
8D–93
WIRING SYSTEM
Interior Illumination Light
General Description
The circuit consists of lighting switch, tail relay,
illumination controller and illumination lights.
All these lights come on when lighting switch is turned on
with the switch to either parking or headlight position.
The brightness of illumination lights except the ones for
ashtray and glove box, can be adjusted by illumination
controller.
8D–94
WIRING SYSTEM
Circuit Diagram–1
D08RW039
8D–95
WIRING SYSTEM
Circuit Diagram–2
D08RW040
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст