Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Service manual — part 1525
8-200 ELECTRICAL-BODY AND CHASSIS
Windshield Washer Spray
Be sure that the engine hood
1
is completely closed before
checking the windshield washer spray adjustment.
Windshield Washer Spray Position
mm(in)
A
Approximately 300 (11.8)
Connector
Be absolutely sure that the wiper motor connector is securely
connected.
This will prevent a poor contact and an open circuit.
Note:
Windshield wiper arm and blade assembly configurations
are different for the right-hand and left-hand side of the
vehicle.
Be careful not to confuse the right-hand and left-hand side
assemblies.
WASHER TANK MOTOR
Removal
1. Remove the washer tank bolts.
2. Disconnect the connector
1
.
3. Disconnect the water hose
2
.
4. Remove the washer tank motor
3
.
ELECTRICAL-BODY AND CHASSIS 8-201
Installation
Follow the removal procedure in the reverse order to install the
washer tank motor.
Pay close attention to the important points mentioned in the
following paragraphs.
Connector
Be absolutely sure that the washer tank motor connector is
securely connected.
This will prevent a poor contact and an open circuit.
8-202 ELECTRICAL-BODY AND CHASSIS
OVERDRIVE OFF (A/T)
PARTS LOCATION
ELECTRICAL-BODY AND CHASSIS 8-203
CIRCUIT DIAGRAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст