Isuzu KB P190. Service manual — part 40

2A-6 FRAME AND BUMPER

Important Operations - Removal

1. Front Combi Lamp Assembly

2. Radiator Grille
Refer to the Radiator Grille in this section.

RTW52ASH000101

3. Front Bumper Fascia

• Remove the 9 clips and 4 screws.
• Disconnect the fog light harness connectors.

RTW52ASH000401

6. Bumper Seal
Remove 6 clips.

Important Operations - Installation

10. Front Bumper Impact Bar Assembly
Tighten the fixing bolts to the specified torque.

Torque N

⋅m(kgf⋅m/lb⋅ft)

62 (6.3 / 46)

7. Front Bumper Flare Assembly
Tighten the fixing nuts to the specified torque.

Torque N

⋅m(kgf⋅m/lb⋅in)

7 (0.7 / 61)

FRAME AND BUMPER 2A-7

5. Fog Light
Tighten the fixing nuts to the specified torque.

Torque N

⋅m(kgf⋅m/lb⋅in)

7 (0.7 / 61)

2A-8 FRAME AND BUMPER

REAR STEP BUMPER

REMOVAL AND INSTALLATION

RTW72ALF000401

Removal Steps

1. Rear step bumper assembly
2. Side step pad

3. License plate light

4. Rear bumper center pad

5. Extension harness

6. Center bar

7. Shell

8. Back bar / corner brace

9. Reinforcement assembly

Installation Steps

9. Reinforcement assembly

8. Back bar / corner brace

7. Shell
6. Center bar

5. Extension harness

4. Rear bumper center pad

3. License plate light

2. Side step pad

1. Rear step bumper assembly

FRAME AND BUMPER 2A-9

Important Operations - Removal

1. Rear Step Bumper Assembly

• Remove the 3 bolts from each side.
• Disconnect the extension harness connector.

1

1

RTW72ASH000701

2. Side Step Pad

• Push out the 4 fixing portions (1) of side step pad from

the back face of the rear step bumper.

RTW72ASH000801

4. Rear Bumper Center Pad

• Remove the 2 clips (1) from both ends of the center pad.
• Push out the 5 fixing portions (2) of the center pad from

the back face of the rear step bumper.

RTW72ASH000901

Important Operations - Installation

9. Reinforcement assembly

• Tighten the fixing bolts to the specified torque.

Bolt (5)

Torque N

⋅m(kgf⋅m/lb⋅ft)

85 (8.7 / 63)

7. Shell

Bolt (2), (3)

Torque N

⋅m(kgf⋅m/lb⋅ft)

42 (4.3 / 31)

6. Center bar

Bolt (1)

Torque N

⋅m(kgf⋅m/lb⋅in)

7 (0.7 / 61)

Bolt (4)

Torque N

⋅m(kgf⋅m/lb⋅ft)

18 (1.8 / 13)