Isuzu KB P190. Service manual — part 50
SHEET METAL 2B-3
RUW52BSH002501
Important Operations - Removal
1. Washer Nozzle Tube
1) Open the hood.
2) Support the hood.
3) Remove the windshield washer nozzle tube.
RUW52BSH002601
2. Hood Hinge Bolt
• Before removing the hinges from the engine hood, scribe a
mark showing location of the hinges to facilitate installation in
the original position.
RTW72BSH000501
Important Operations - Installation
3. Engine Hood
• Check the engine hood and fender (1).
• Clearance : 4.0 mm (0.16 in)
• Height (step) : Flushness
• Adjust clearance using the hinges on the engine hood.
RTW72BSH000701
• Adjust height (step) using the hood rests (1).
Engine Hood Striker
• Apply a light coat of grease to the striker.
2B-4 SHEET METAL
2. Hood Hinge Bolt
• Tighten the engine hood hinge fixing bolts to the specified
torque.
Torque N
⋅m(kgf⋅m/lb⋅in)
10 (1.0 / 87)
SHEET METAL 2B-5
REMOVAL AND INSTALLATION
RTW72BLF000701
4JK1 (High Output) / 4JJ1 (High Output) Model
Removal Steps
Installation Steps
1. Hood insulator
8. Engine hood bulge
2. Intercooler seal
7. Hood seal
3. Washer nozzle tube
6. Washer nozzle
4. Hood hinge bolt
5. Engine hood
5. Engine hood
4. Hood hinge bolt
6. Washer nozzle
3. Washer nozzle tube
7. Hood seal
2. Intercooler seal
8. Engine hood bulge
1. Hood insulator
2B-6 SHEET METAL
RTW72BSH000301
Important Operations - Removal
2. Intercooler Seal
• Remove the 6 clips.
RUW52BSH002501
3. Washer Nozzle Tube
1) Open the hood.
2) Support the hood.
3) Remove the windshield washer nozzle tube.
RUW52BSH002601
4. Hood Hinge Bolt
• Before removing the hinges from the engine hood, scribe a
mark showing location of the hinges to facilitate installation in
the original position.
RTW72BSH000801
8. Engine Hood Bulge
• Remove the 4 nuts.
RTW72BSH000501
Important Operations - Installation
5. Engine Hood
• Check the engine hood and fender (1).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст