Isuzu KB P190. Service manual — part 53
SHEET METAL 2B-15
FRONT FENDER PANEL (A TYPE)
REMOVAL AND INSTALLATION
1
5
2
4
6
3
7
RTW72BLF000201
Removal Steps
Installation Steps
1. Radiator grille
2. Mud guard (W/O front wheel extension)
3. Front wheel extension (W/ front wheel
extension)
4. Inner liner
5. Front bumper fascia
6. Side turn signal light
7. Front fender panel
7. Front fender panel
6. Side turn signal light
5. Front bumper fascia
4. Inner liner
3. Front wheel extension (W/ front wheel
extension)
2. Mud guard (W/O front wheel extension)
1. Radiator grille
2B-16 SHEET METAL
Important Operations - Removal
1. Radiator Grille
Refer to the Radiator Grille in this section.
3. Front wheel extension (W/front wheel extension)
Refer to the SECTION 10 “Front Wheel Extension”.
4. Inner Liner
Remove the inner liner fixing screws.
5. Front Bumper Fascia
Refer to the Front Bumper in this section.
RTW72BSH000201
7. Front Fender Panel
Remove the 8 fixing bolts.
Important Operation - Installation
7. Front Fender Panel
1) Tighten the front fender panel fixing bolts to the
specified torque.
Torque N
⋅m(kgf⋅m/lb⋅in)
10 (1.0 / 87)
SHEET METAL 2B-17
RTW72BSH000601
2) Check the fender and front door (1).
• Clearance : 5.0 mm (0.2 in)
• Height (step) : Flushness
RTW32BSH000301
2B-18 SHEET METAL
FRONT FENDER PANEL (B TYPE)
REMOVAL AND INSTALLATION
RTW52BLF000101
Removal Steps
Installation Steps
1. Front combi lamp assembly
2. Radiator grille
3. Mud guard (W/O front wheel extension)
4. Front wheel extension (W/ front wheel
extension)
5. Inner liner
6. Front bumper fascia
7. Side turn signal light
8. Front fender panel
8. Front fender panel
7. Side turn signal light
6. Front bumper fascia
5. Inner liner
4. Front wheel extension (W/ front wheel
extension)
3. Mud guard (W/O front wheel extension)
2. Radiator grille
1. Front combi lamp assembly
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст