Isuzu Trooper (1998-2002 year). Service manual — part 1038
8F–80
BODY STRUCTURE
Tailgate Dove-Tail Striker
Adjustment
683RS012
1. Loosen the striker bolts.
2. Tap with a plastic hammer to align.
D
Gaps between Dove–Tail Striker (2) and bracket (1)
are 0 mm (No clearance).
683RS013
3. Tighten striker bolts.
Torque : 12 N
•
m (1.2kg·m/104 lb in)
8F–81
BODY STRUCTURE
Tailgate Frame Cover (LH)
Parts Location
684RW001
Legend
(1) High Mount Stop Light
(2) Washer Tube
(3) Tailgate Frame Cover
Removal
1. Disconnect the battery ground cable.
2. Remove tailgate frame cover.
D
Pull the tailgate frame cover (2) out.
D
Disconnect the washer tube (1) at the nozzle and
pull the washer tube out from the frame cover (2).
D
Disconnect the rear defogger and pull the harness
from the cover.
684RW002
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Hit the lower A edge portion of the cover (1) to the
tailgate flange.
2. Clearance between the frame cover and the tailgate
panel (B portion) is 1 mm (0.04 in).
684RS008
8F–82
BODY STRUCTURE
Tailgate Frame Cover (RH)
Removal
1. Remove tailgate frame cover (RH).
D
Pull the frame cover out from the tailgate frame.
684RS011
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Hit the lower A edge portion (2) of the tailgate frame
cover (1).
2. Clearance between the frame cover and the tailgate
panel (B portion) is 1 mm (0.04 in).
684RS010
8F–83
BODY STRUCTURE
Tailgate Sash Trim Cover
Parts Location
684RS012
Legend
(1) Tailgate Sash Trim Cover
Removal
1. Remove tailgate sash trim cover (1).
D
Pry the tailgate trim cover retainers free from the
tailgate panel.
684RS013
Installation
1. Install the tailgate sash trim cover (1).
D
Insert the trim cover retainers into the tailgate hole
securely so that there are no gaps between them.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст